The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support Fuel Injector Clinic

Recent content by bh4000

  1. bh4000

    1G Help with dent repair 1GA

    We took the skirt off, took the interior panel off and popped it out, it wasnt a big deal. I used a 2"x4" piece of steel, 1/4" thick, a bar acting as an extension to get past the interior side of the body sheet metal, and a 16oz hammer. We heated the sheet metal up with a heat gun, and worked...
  2. bh4000

    1G Help with dent repair 1GA

    It's complicated. I called two local shops and they wanted $10k to paint the car, insane - they want to bill it like a collision insurance job with 400 line items, one for each ding. I found a local guy to paint it cheap. He had a good reference that I checked out and he provided some good...
  3. bh4000

    1G Help with dent repair 1GA

    Hi, I have a dent behind my passenger door that I need to pop out. The car is getting ready to be painted. What is the best way to accomplish this?My first thought was to take the interior panel out, take the side skirt off, and then make a wooden buck in the shape of the panel and then beat...
  4. bh4000

    1G ECMLink loses program

    Mark this as solved. I verified that the ECU is keeping my generic MPI relay closed for about six seconds after I turn off the engine. I was disconnecting battery voltage with the 150 amp circuit breaker before this cycle completed.Thank you for all the help!
  5. bh4000

    1G ECMLink loses program

    Sorry for the delay, I had to look over my schematics. This is a 100% rewired car, engine and chassis. I am using 30 amp mini relays, and the new wiring is exactly the same as factory mimicking the MPI function.I think the problem I am having here is I am disconnecting the battery with the...
  6. bh4000

    1G ECMLink loses program

    Yes, it sure is annoying, and dangerous...
  7. bh4000

    1G ECMLink loses program

    1g AWD with ECMLink. My ECMLink randomly reverts to some default state. I have completely rewired the car and disconnect the battery everytime I park it with a 150a circuit breaker.I have verified there is always battery voltage at pin 103 for the battery backup input, regardless if the...
  8. SOLD 1G / 2G Shep Stage 3 Transmission AWD with 4 Spider Center Diff
    Sold

    For sale SOLD 1G / 2G Shep Stage 3 Transmission AWD with 4 Spider Center Diff

    SOLD - Thank You.Shep Stage 3 Transmisison, freshened by Shep, 4 spider center diff. This has a EVOIII first gear and input shaft and 1G shifter arms. I have the invoice from Shep.This is a 2G AWD transmission out of a 1999 GSX. I got it from a local guy that had Shep rebuild it. I...
    $2,800.00
  9. JM Fab DSM O2 Housing - Recirculated

    Question by 'bh4000' on classified ad 'JM Fab DSM O2 Housing - Recirculated'

    Price Drop, now $275 shipped.
  10. bh4000

    Warning: Josh at True Street Tuning is a FRAUD, ripped me off for a $1400 subframe

    It appears Josh is operating under the name NDD Motorsports these days.https://ndd-motorsports.mybigcommerce.com/products/1g-dsm-rear-subframe.html
  11. bh4000

    1G Stripping urethane bumper cover

    I need to strip my front bumper cover, 1991 AWD. It was painted with no flex additive and the paint chips off in chunks. I need to take it down to the substrate before painting it again. Reading on the web, it sounds like sodablasting or chemical stripping are the two ways to approach this...
  12. JM Fab DSM O2 Housing - Recirculated
    Sold

    For sale JM Fab DSM O2 Housing - Recirculated

    Selling a tubular DSM JM Fab O2 recirculated housing. These are OUT OF PRODUCTION and impossible to find. The ultimate DSM O2 housing. This was used for probably 200 miles on my FP green. I bought it new from Extreme PSI. It's in perfect shape, but one of the bolts broke when I disassembled...
    $250.00
  13. FS: FIC 1100 High Z injectors, like new
    Sold

    For sale 4G63 FS: FIC 1100 High Z injectors, like new

    Like set of FIC 1100cc High Z injectors for DSM or EVO. These only have a few hundred miles on them. I bought them new from JNZ tuning. Perfect for a FP Green! These were flawless - great idle with these!Paid $486Asking $350 plus $10 shipping.
    $350.00
  14. bh4000

    Breaking all 4 loose on the highway, 1G AWD.

    Thanks for the input so far.I think for now I will only test once the road is warm. I have abs sensors in the back that I could wire into my data logger, but honestly it would be a lot of work. I don't have abs sensors in the front.My first thought was to get a set of max performance...
  15. FS: EVO Beehive Valve Springs and Titanium Retainers, $75
    Sold

    For sale 4G63 FS: EVO Beehive Valve Springs and Titanium Retainers, $75

    Selling a set of OEM Mitsubishi EVO VIII valve springs and retainers. I bought these from Curt Brown with my CBRE head around 2015. I only used them for a few hundred miles and never had an issue. $75 plus $10 shipping. These come with valve springs seats, one of the seats is damaged, but...
    $75.00
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top