Some road construction has led to the city putting those giant solid steel plates over the new asphalt and Im assuming I got unlucky and one of the corners from those plates hit directly into my pan. And after I had replaced the fluid I ended up needing a bit more than what I had assumed I...
Absolute thank you to everybody here who helped out with the info and input, I definitely needed second opinions and I’m grateful for y’all with new info and just things I’ve never thought of.I did end up sourcing a new pan a few weeks after my last post on 10/19/21 from a local junkyard that...
I’ll go ahead and look again this weekend. The only thing with visible damage and leaks was the pan. No leaks or anything else in the surrounding area.
Update for today; car shifted into reverse and drive for a minute or two. Moved 10ft back then forward and once it got fully warmed up is when it didn’t shift into gear anymore. I didn’t press the gas, just let the car move on its own, it did very slightly stutter when I tried to go into reverse...
Thats what i was thinking at first because I drove home, and let it sit till I was able to find a new pan. All the connectors are in place and the only metal shavings were from the magnet that broke in half up because of the pothole. No burnt smells or anything out of the ordinary, the old fluid...
It was Saturday the 9th when I noticed the small leak at work, drove home and hadn’t moved it since. I checked the fluid while at work before I even moved my car and it was still at level so it hadn’t lost much then. The rest was drained and leaked while it was sitting at home. Couldn’t have...
I am going to buy another few quarts in the morning just to cycle it out and check what the others here have recommended. Do everything again just to make sure I didn’t overlook something
The crack was maybe an inch or less, honestly super slim crack. Contemplated on getting it welded instead of getting a new one, but majority of the fluid leaked out over the span of a week. When I drained the remaining fluid from the pan it was probably less than half a quart. I checked the the...
Trans pan cracked earlier this week because potholes, swapped it today and put new atf and magnet. Turned her on to see dipstick levels and it’s perfectly around at the “hot” level when in neutral. Tried shifting into anything and no go. No reverse or drive. I’m completely at a standstill and...