The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support Rix Racing

Recent content by Awdboost

  1. Can Crankshaft be manually tap?

    The only thing I would be worried about is have the crank off balance, nor would i even trust this in a higher hp car.. buy a new crank which should be to expensive. Most people just trash the 7-bolts.
  2. Timing Belt off?

    It's hard to tell on camera. It looks off a tooth on the crank.. Make sure the marks line up.. NOT the teeth on the cam gear. Turn the motor over a few times and line up the marks. See if they line up again.
  3. My Journey to a Quiet 3in Exhaust (Vids + Pics)

    Ditch the cheap shit and go to a HKS Exhaust. They are much quiet at idle. I never get bother by cops in my area. HKS puts in long smaller resonators that helps keep noises down. Plus the thicker metal helps too.
  4. MAPerformance FDSM 9.14 @ 153.7mph Video

    Thats really weird. The car hops at the line. Fix that and you'll have a 8 second pass. Nice job BTW.
  5. Clutch/Hydraulic system woes.

    Only use OEM Mitsubishi parts.
  6. Rev high Questions

    I’m in the processes of building a 6-bolt motor for my 98. I want to rev to 9K.. I’ve heard from more than one person that the lifter at that RPM will see too much oil pressure. Any where from 100-130 psi at the head witch the lifter can not bleed out fast enough and end up with bent valves...
  7. Clutch recommendation for an underpowered race car?

    I would look into the Fidanza 3.2 Performance clutch. Its a four puck Kevlar, sprung disc that drive like a stock clutch, and can take repeated launches. Check out the video that they have on there homepage.. I've been doing this for a while and I learned allot from the video. I want to try...
  8. oil pressure light come on during hard brake

    I would recommend replacing the low oil pressure sensor and check to see if the wires are good... Maybe spending some money on a real oil pressure gauge and seeing if it dips.. Check your oil for any silver metal too.
  9. Evo VIII Cams in DSM? [Merged 5-9] 8 cam

    It's on the exhaust cam on an evo isn't it..You know you can use an EVO MAF too. :)
  10. Borg Warner S200 (Bullseye S256) Review

    I know that Borg Warner turbos are more efficient then Garrett but I don't know about the Bullseye exhaust housing?? That does make or break a turbo... I'm interested in seeing how it dynos
  11. Devo Tuning BBQ June 9, 2007

    Just a reminder tomorrow at Devo Tuning Free BBQ.. See everyone there!!:thumb:
  12. Devo Tuning BBQ June 9, 2007

    Saturday June 09th Devo Tuning will be having another BBQ with free Food and, DJ Markski will be spinning live and handing out free CD’s to the first 100 people. The BBQ will start around 12:00pm to ??? Come to enjoy the music and cars. For directions visit:www.devotuning. com
  13. Devo Tuning BBQ meet

    I just want to thank everyone for coming out. Adam and I had a blast. Great food and great turn out. Hopefully we will have more meets in the future.Here are some pictures that Dave tookhttp://www.flickr.com/photos/66233498@N00/sets/72157600054574035
  14. Devo Tuning BBQ meet

    I'll let him know. ROFL
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top