Contact AutoPower. There's looks like it MIGHT work and it has a centre bar you can bolt/unbolt.Autopower Industries - Roll Bars

Manuel, you're in Canada, our ruling is a bit different. Go to casc.on.ca and register for the forums they have alot of pictures and info there and you can find CASC's actual rulebook on rolecages. Basically all styles are pretty similar, the more important aspect is the material you'll be using...

So I brought my stripped down Talon to it's long due virgin shakedown last Wednesday to Cayuga's road course and it ran amazing...for a maximum of 5 laps at a time.Everything about the car ran amazing except for the cooling system. After about 5 laps it would overheat rapidly and I'd have to...

Are you drag racing your car or lapping it?Aluminium rods aren't your best choice for a 'safe lasting' engine. I know teams that need to replace their aluminium rods every 4 passes (Drag), however they make over 900 whp and run nitrous. Manley rods are amazing. The main gain you get out...

cough...group buy...cough cough

I have their redesigned 1g kit. Flanged for greddy, and also comes with a knockoff greddy type S bov. Piping's aluminum, comes with t-bolt clamps, silicone couplers and everything else needed. Good deal, we'll see how it holds with 21psi...

Good info...now how about a stock gutted hood? is it comparable to fiberglass?

My buddy's running a fwd with an awd transmission. It fits fine, the reason to do this would be because the awd transmission can with-hold more power.

Just wondering who here has done this and approx. how much weight it saved. Is it comparable to a cf or fiberglass hatch at all?

All you need to do is mount it to the 'frame' infront of the radiator. There should be 2 holes for bolts on each side, just weld a plate onto the intercooler and you're set. Also on a 12" tall intercooler expect to have to bend the hood latch a bit or just mount the intercooler a little lower...

First make a boost leak tester, should cost you about $20 in parts at Home Depot.Search on how to make one, it's very simple...then attach it to an air compressor until you hit 'X' psi and listen for leaks.Good idea would be to put watery soap over anything having to to with intake...

RACEONUSA HiFlex™ Middle 63'' Body Kit Front Bumper Splitter > Universal - RAC4934merry xmas

Found this list of nonos that i wrote up a couple months ago.Bought these straight from the dealer, and the results were no good.Valve springs are the same seat pressure as stock, but 20lbs more at open.Coild bind is too soon. Cam takes spring up too close to the coil bind. Coil...

Wow thanks alot guys, that link made it much easier to understand what's going on in the connector. :thumb:Im going to the auto wreckers today to pick up a hood prop,but ill pick up a pigtail too just in case.THANK YOU

So i was adjusting my tps sensor (1g) and stupidly i knocked out a wire that goes into the CONNECTOR.No clue how these connectors are assembled, is it possible to somehow get the wire back in there or do i just need to find a pigtail to solder into? If able to fix, what do i need to do/get?