It was leaking from the oil drain on the pan, which I fixed so most of my oil probably went on the ground from there! the PCV valve has pressure coming out from it so im guessing its not gunked up? I have not yet cleaned any of the piping, the previous owner didn't take care of it at all! I...
I purchased a 91 talon Tsi with a blown turbo, I replaced the turbo with a good 16g i had! The old turbo blew all the oil and antifreeze down the exhaust, making it smoke like crazy! Now after I replaced turbo and go it running good again, It blows oil out of the bov which really has my concern...
Exactly what I figured and ya im very interested in buying one, I have the money set aside for the pte so I know ill have enough for the hx40! Do you know what size of inj to go with? Any sort of chart saying what inj may max out at or anything!? And I was told 500whp is gonna be very tight on...
Ya the clips just go bad, I just took a screw driver and had someone play with the door lever while i adjusted the clip in the right stop, some times they get bent and what not!
ya I have every bolt on, built long block, Eagle H beams, Wiseco 1400 hds, stock crank polished, arp mains, arp headstuds, MLS headgasket, GSC S2 cams, Beehive springs/ Retainers. Inj ill need to upgrade for e85, Im running the 255 fuel pump someone told me to get a different one thats just...
Ya journal bearing is what I was thinkin, I wanna buy new or at least know the turbo is good, because I was ripped off on a 50 trim I bought. Im thinking holset would be cheaper anyhow, is the lag bad on the hx40? And any opinion on what size inj. to run to hit my goal? I am willing to try any...
I was wondering which turbo is better for my 500-550whp goal? the PTE 5857 or the 6262, or I was also wondering weather or not to do hx40, I just don't know where to find the hx40 at. Also was wondering which inj. to use. I currentyl have 1050cc fic's, but I know for sure I can't make 500 if I...
The turbo honestly seems fine spins freely, I guess its just my mind, no in and out shaft play! But could the turbo still be blown? If I don't find out im just gonna throw a HG on it with studs, TONS of coolent and oil coming from the exhaust when it runs. It does not over heat according to the...
I had a stock 14b turbo, still continues to poor out the exhaust! Im gonna replace the hg and stud it! What are some necessary steps for doing the hg, cleaning/checking wise!
turbo, ill pick up a new one, but if turbo was shot would there be oil and coolent coming from the exhaust!! A significant amount as well!! And how do you do a leak down test? Just drain?
I picked up a 91 talon tsi, fwd just as a daily for cheap going through it got her running, started her up and she just starts smoking white smoke really bad. Exhaust has oil/coolent dripping out of it. Turbo has slight shaft play nothing to bad at all, very slight in and out play!? But tons and...
Speed Density? Is it hard to hook up and is the 95$ kit on ecmlink.com all i need to use it? Along with eprom ecu and dsm link? What exactly does it do?
Ya fix that intercooler piping make it go around that right side and up with your new J-pipe! That is an ebay manifold, which if your lucky it won't crack but most of them do that I have seen. I have seen those Manifolds run for 75-175 bucks really! And intercooler piping, i have seen that...