If anyone can bring an answer to this question. What is the thread pitch on the FIC fuel rail?

So I found that the starter relay might be bad. I used another from a car I bought that was sitting all ripped apart and that was bad as well!I think that because once I jump pins 3-2 or 3-1. The starter cranks when I turn the key. So I ordered new ones today for both cars since they were both...

I just bought a car last year change the engine. It was a six bolt I changed back to the seven bolt running engine and I’m getting everything fired up.I go to turn the key and I don’t have 12 V to the signal wire. The power wire has 12 V, the ground is hooked up to the starter bolt, intake...

engine vibrations on a small bolt. Nothing to think about. Its very common just make sure the threads are dry of any oil on installation. Also use one drop of temporary loc tight.

blue loc tight one drop. I would inspect the drive and driven gears for excessive play the smaller gear may have been wallowed out if it backed off the balance shaft. T answer you question yes you found the oil leak.

if the pump was getting louder it can be a clogged filter starving the motor of fuel. assuming you don't have a fuel gauge after the rail to check? have you changed the filter? First pull feed line off fuel rail and power the fuel pump test connector. Make sure You have a container for fuel to...

after all maintenance is done. I would upgrade to a tuning device, fuel pump, 880-1000cc injectors. That way anything you add can be monitored and tuned to make positive power. I always check supporting mods when modding your car or you can break other components.

Still have these

Thanks guys Iam converting to awd and want to do a factory interior. This now has the info I was searching for!

Great thread got me on the right track thanks