OK to make a long story short...... i have a rebuilt 6 bolt forged pistons/stock rods, new bearings, machined block etc. Well the car only went on occasional drives around the block and stuff, no boost, for roughly 10 months and mostly sat in the garage cause i could not yet tune it (car only...
Ok new info:I made a couple more pulls and the logger will still read 43 counts of knock at about 7-8 psi (Not a WOT pull) but my o2's are at .85v when under boost on every pull!!......isnt that about where it should be? Fuel trims are all at about 100%, I have wiseco 8.5:1 pistons...
Well i have an internal gate on the PTE set at whatever the spring setting is, i thought it was about seven. Could my loud exhaust be triggering off the knock sensor? Thanks for the info NOSLO2PT0 :thumb:Edit: Would race gas be of on the new motor, just curious?
Ok, i just got my car a few days ago with a fresh rebuilt motor. I babied the car on the way home (10 miles) because i though that the was the most common used method when breaking in a new motor. I then read here that some people were having problems with there rings sealing right when they...
My friend is about to buy a 2g GSX for 5k, the car is well worth 5k because of the mods done to it but it has some rod knock. Other than the rod knock the car seems to be in great shape, Good compression no shaft play etc. My question is, what would be the best way to fix the rod knock? My...
Nice, thanks for that info. I'm a member at that yahoo group but didnt find any info on who else might sell the serial/usb cable that i need. I'll have to look again, Thansk for your quick responses. :)
1. Does anyone know if you can use a normal USB cable (or a cable i can buy locally) to link the e-manage up with a laptop or is there a specially made cable that you need to buy? (I know about the one Greddy sells but its real pricey) It looks like a cable you could pick up at a local PC store...