Hi guys, my 20g turbo blew and according to what I found out the major turbo companys want about 600 to 700 for rebuild on a mitsubishi turbo. I guess I need help in chosing a new turbo step above the 20g or maybe if anybody knows a company that could rebuild a 20g turbo for a resonable amount...
Please copy this form and answer the questions when you request tire size recommendations:TIRE SIZE RECOMMENDATION REQUEST FORMPlease answer the following questions when requesting tire size recommendations.1. My car is a:
a) 1g DSM
b) 2g DSM2. My wheel size is:
Diameter...
Hi guys, me and my brother in law just got his 91 talon awd started the other day and we found out that the car is burning oil through piston number 1. We did a compression test and the numbers were #1 90 #2 155 #3 155 #4 155. So the question is this I have another engine sitting at home with...
Hi guys, well I got good news and bad news. First the good news I found out that the turbo was the one that was leaking, it wasn't a bad leak but leaking, compression was #1 155 #2 155 #3 145 #4 150, I think that's within spec. Now the bad news as I was doing the boost leak test to double check...
Well I figured out that the pcv valve was no good so I replaced that with a new oem piece, but I'm still getting a little air in the valve cover even if I plug the pcv hose coming from the intake. Any other ideas what it might be? Thanks.
Alright, I finally figured out the my sim and my injector rings had a leak, replace the manifold gasket and the injector rings so that fixed that leak. Now the question should I be leaking out of the oil cap? Should the leak test be done with the engine at operating temp or could it be cold?
Hi, I was working on my brother in law's 91 awd talon, the car had no spark and we checked everything there was to check and turned out that the ecu was bad. So the question is I have a 90 eclipse gst, would my computer work on his car, or what other year would work, Thanks.
Is it possible to have a vaccum leak and the car still boost normal? The reason I'm asking is because I just finished doing a couple of more upgrades on my car and one of the being a sheet metal intake manifold, could be leaking. The car was running fine before the install with good vaccum and...
Another thing, would it make a difference if I used t-taps instead of welding the wires? If I can't figure this out I'll just take it to a shop to install the darn thing. It's funny I could tear down an engine and rebuild it no problem but when it comes to wiring I'm a nervous wreck!
Well, according to the instructions on the manual that came with the unit, were I'm suppost to have ground I have power, so I used that as the power wire and I used another wire from the ecu harness for ground but now it will only work when I actually start the car, if I just turn on the...
Ok does anybody have instructions how to install a safc II on my 90 eclipse gst? Is it the same instructions wether you have a maft or not? Any help would be useful since the instructions that came with the unit are not working. Thanks Hugo.
All the wiring is done correct according to the apexi installation manual, the problem I'm having is the plugs that are going into the ecu have power where (according to the manual) should be negative and have no power (according to the book) where there should be power. I'm going to try and...