I have a BW S258 with the .70A/R hot-side. It has the 4bolt flange. I'm using the punishment racing budget series manifold. I'm also using the VRS 3in turbo back exhaust. I want to know what everyone else has done to make the housing. I will be dumping the external waste-gate to the atmosphere...

Which I agree with sort of. Why are you quoting me I said what your saying just didn't go into detail about it. Not to mention theres much more that plays into it then your dirty explanation. Also I know that vac to boost happens very quick and you really can't measure it. I was using his...

How is the above statement even close to being correct? If you were at-12in hg and you had to go to your number of 27psi that would be quicker than going from -15in hg to 27psi.Most cars however are more in the -17 to -20in hg with stock cams . Thats not the reason cars with cams spool slower...

You really need to log your mas air flow readings around the time of the said problem. I thinks its mass air flow related however someone said something about fuel cut. If you have a chip it could be removed and you wouldn't hit it. I hit fuel cut at about 15-16psi on a evo 16g with 580's. You...

How is that helpful? I plan to upgrade them someday. Most dsmr's don't upgrade those til last..sad yes but its a dsm thing.Now is there any other parts above that may not be enough for my goals...and Im really leaning to towards the BW S362. I think it would be perfect. How much abuse can...

So your vote I take it is for the S362... what rpm do you think itwill spool at? I was hoping no more than 4500-5000. 5000 is a bit laggy though. does anyone know who has the best deals on them? I could have got one for 1250. should have.Also IPT I se your from des moines, Is there any...

Im getting ready to purchase a new turbo and can't decide between the two. I want to have 400-450AWHP on pump and 500-600HP on race. have almost all supporting mods needed. ALL thats left is the turbo. Now I now the 35R is proven again and again,but the new BW300 seems to be turning some...

I just have to get this off my chest. I'm away from home and I get a call from my dad they said they had a hail storm. So anyways I thought i had enough body damage (right front fender is dented in) he tells me he counts 56 dents. AHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH:cry:Then I get a hold of...

I also picked up a dd. My dsm is down (turbo didn't like the 28psi). SO I got a 07 GTI. Im very very impressed with it. I made fun of them at first and thought all germans cars were slow. I was dead wrong, it handles good too. I also love all the little features on it. Don't get me wrong it...

Make sure you mark around the bolts with some white out or other marker before removing them,so everything is lined up correctly when going to put the new one in. Have you found one yet?Derek:dsm:

I just bought a 07 Black 2dr GTI. It only has about 270miles on it,but I love it. I test drove my friends and fell in love with it. They finally brought the gti and other vw models back to germany. The quaility control is also back. I don't mind paying more for a better product. Also it is...

I finally got to drive my car. First I let it run until it was at half way on the temp guage. I noticed a small leak by the t-stat, but nothong major. I drove it about a mile and it ran fine, then when I went to drive to work it wouldn't go past 5 grand, as I pressed the pedal the rpm's...

I finally got to drive my car. First I let it run until it was at half way on the temp guage. I noticed a small leak by the t-stat, but nothong major. I drove it about a mile and it ran fine, then when I went to drive to work it wouldn't go past 5 grand, as I pressed the pedal the rpm's...

Morphius....I can't say much for you.but tons against you.How can you compare a mechanic from off the street to a tech that has 1-2 years schooling,plus another half a year in a special brand...say audi. We are under paid more so than overpaid. Just to send someone to the basic audi...

Thank You I felt I did the above post for nothing. If only people would read the ENTIRE post before they put there two cents in.Also I agree 100% thats why on the side I want to take a few buisness classes, possibly toy with getting my BA in mechanical engineering through a college that...