Break In Secrets--How To Break In New Motorcycle and Car Engines For More Power

Piss as many liberals off as I can with my conservative values.

Power transistor took a dump. If the rpms are reading half what they should ie: spinning 4k rpm but only showing 2k, def means change the transistor.I actually watched the video, tach seems to be reading properly. If you have spark on all 4 wires, its a compression, fueling, or spark plug...

http://www.dsmtuners.com/forums/frequently-answered-dsm-questions/113858-venting-your-bov-atmosphere.html http://www.dsmtuners.com/forums/frequently-answered-dsm-questions/273778-turbo-should-i-get.html Tech Guide - DSMtuners

Only thing I can say is "wtf??!!"

A bad o2 will not cause a dsm to not boost. When you apply 100% throttle, the ecu goes into open loop, disregards the o2, and runs a predetermined fuel and timing map. It monitors the knock sensor to pull timing when needed. The only time a car looks at the o2 is during closed loop operation...

Not enough airflow. Try to seal the fmic to the front of the radiator as best you can. If the car still has a/c thats another restriction in front of the radiator. Air will always take the path of least resistance. It seems that you have the cooling system in good shape. The water pump might be...

This happened to me. Get a telescopic magnet. Drain the oil and leave the plug out. Remove the turbo drain line. Extend the magnet and stick it in the drain hole and move it back and forth across the inside if the pan. Extract the keeper and reinstall the drain and plug. Its not rocket science...

Good info, I'm running the CC forged fork.

Awesome...exactly what I was looking for. Thank you.

The pcv goes to the bottom nipple in that pic. The nipple for the bov is next to the intake manifold support bar on the left of it. Looks like he just looped the hose from the pcv nipple to the bov nipple.

Vacuum nipple to the right side of the tps, on the manifold.

Are there any tips or tricks I should be aware of that aren't already discussed in the threads? I want to make sure I don't miss anything.

Updates?

Holset hx35 will meet your needs.