The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Rix Racing
Please Support Morrison Fabrication
Jane Hacker

Latest activityPostingsVehiclesAbout

    • Jane Hacker
      Jane Hacker reacted to 1999RSfwd's post in the thread 3D Printed Car Parts with Like Like.
      I work in the metrology lab at my job running a Wenzel 5 axis cmm. We also have a Creaform HandySCAN 3D scanner that I use with their software VXelements. I could always try and scan some parts and save the STL files out somewhere
    • Jane Hacker
      Only partially helpful, but there's what the FSM states about coil identification:FRONTREAR
    • Jane Hacker
      I don't have 1g numbers available to me but you might find this information of some use:97-99 OEM Stock AWD Front: 246 lbs/in Rear: 151 lbs/inEibach Sportlines for 97-99 AWD Front: 286 lbs/in Rear: 146 lbs/in1990 OEM Stock AWD Front: 146...
    • Jane Hacker
      Jane Hacker reacted to 19Eclipse90's post in the thread 3D Printed Car Parts with Like Like.
      For me, it is reverse engineering = time spent with dial calipers, protractors, scales, etc.. When I was introduced to 3D scanning, it seemed like a great way forward. What we didn’t have was the translation of the mesh cloud into a 3D model so...
    • Jane Hacker
      Jane Hacker reacted to thuddor's post in the thread 3D Printed Car Parts with Like Like.
      I'm working now on the engine cover for 4g63. Mine was really trashed. I just have to insert the Mitsubishi Logo on the front face and reinforce the weak points on the actual OEM part.
    • Jane Hacker
      Jane Hacker reacted to thuddor's post in the thread 3D Parts Files with Like Like.
      2G Window Door Trim
    • Jane Hacker
      Jane Hacker reacted to thuddor's post in the thread 3D Parts Files with Like Like.
      THIS THREAD IS MEANT TO BE FOR PART FILES TO BE ADDED, NOT TUTORIALS OR A GUIDE !In order to help the community, I thought it would be a great idea to have a main thread with all 3D print parts. You need to specify the model, make of the car...
    • Jane Hacker
      Jane Hacker reacted to thuddor's post in the thread 3D Printed Car Parts with Like Like.
      That's the final version of the trim. I also improved the geometry after some tests on my car. This should do it :)
  • Loading…
  • Loading…
  • Loading…
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top