I can't figure out what you're trying to do with the way you have configured DSMLink.Lets start with a current Mod list and while you're at it fix your TPS. The IPS isn't switching when the throttle is closed and the lack of adjustment isn't...
Hard to pin-point only by the pic, just trace the leak or use a UV dye leak detection kit.Oil leak at any location higher than the head gasket, such as from CAS, cam seals, valve cover gasket, etc etc usually go down to the head gasket edge...
I have it back together and can mark this thread as resolved. It runs now. Fired right up. Was definitely a pain (because I suck at electrical) but it's good now. Thanks again y'all.P.S. I'll be referring back to this one a lot I'm sure, for...
Yes.What I meant in the post from last night is, the video is actually showing the issue.In this moment in the video (the screenshot below), when you touch that terminal with the positive probe (the negative probe was grounded), the...
Yeah you had a short in battery side of the 20A fusible link. Should double check that you have no conductivity to the ground with the terminals of 20A fusible link. If you see no conductivity on both terminal, you have fixed it.
I watched the whole video now and I think that there is a short in somewhere between battery and that 20A fusible link terminal in the relay box. (Or maybe you wired something improperly.)
In the video, you have a conductivity with the terminal...
You are referring to the 20A fusible link that is green arrowed in the pic below, correct?It's because ECU loses the power source if you blow that 20A fusible link. That 20A fusible link supplies the power to ECU through MPI relay.I would...
That's Hotwires or knock-off of that. Maybe like 20+ years ago it went kinda popular but as "fashion" rather than "performance". Those spark plug wires may have some sort of builtin capacitor by claiming that you would have stronger spark. That...
I see you are saying the pilot diameter is different. I am not sure why different. Maybe OEM vs Reman.
Is the pilot OD is smaller than the ID of bushing on crankshaft?This seems to be yours and according to the manufacturer site, it should fit...