Running out of stuff to sell. Here's what is on offer at the moment:
Used cast Forced Performance Race manifold for Evo 123, DSM or Galant VR4 with 4G63. It was on my car for a couple thousand km but the car has been in storage for a decade. No issues whatsoever. Asking $250 USD shipped in North America.
SouthBay/RCI 2200cc high impedance fuel injectors with adapter clips. I was told these had very little run time, but they're way too big for my goals since we won't ever have ethanol again. Asking $425 USD shipped in North America.
New Turbosmart Gen V wastegate actuator kit for Borg-Warner EFR turbos (part number TS-0620-4012. These should fit the entire EFR turbo line (and probably others) with the supplied rods. I also have a Borg-Warner 59007119007 "cheater" bracket that is used to tuck the wastegate actuator in on the B1-frame EFRs. Tried to use them on my EFR 7670 but it wouldn't clear the compressor housing with the cheater bracket. Asking $250 USD shipped in North America.
A/C condenser fan for Evo 123. I bought this to run OEM fans on a tucked radiator setup but changed plans. It is in excellent condition, one of the best condenser fans I've seen for Evo 123 (they usually pick up a lot of road debris and rust). Asking $160 USD shipped in North America.
Matched input shaft set for Evo 1 - comprised of the input shaft, as well as the 1st and 2nd gears. This is the setup to give you the tall 2.571 1st gear and 1.600 2nd gear, and they are really hard to find. Includes the idler gear setup that is required for clearance. Nice condition, no longer needed. Price is $600 USD shipped in North America.
Used Galant VR4 RS Evo 2.571 first gear. This is the '79' gear that is identical to Lancer Evo I, it's in very nice shape - $150 USD shipped in North America.
NOS Lancer Evo I 1.600 2nd gear - MD744839. Perfect condition - $225 USD shipped in North America.
NOS Lancer Evo II/III 3rd gear - MD747250. Perfect condition - $125 USD shipped in North America.
420A ARP head studs (used) - $85 USD shipped in North America.
Big time attack rear wing for Evo 1-3 but could be used on anything. Maker unknown but it came from Japan, it has a Garage MZ sticker on it, came from a circuit spec Evo 3. The foil is aluminum and extremely light. Asking $350 USD shipped in North America.
Pair of Bride seat rails for Evo 1-3, Lancer GSR, etc. I had my pair of Bride Ergo 1 seats mounted on these, worked flawlessly. I think these are the 'MO' type, which fit a variety of different Bride and Sparco seats. Asking $200 USD shipped in North America.
2G DSM center taillight panel and left taillight. I think one of the center mounts on the center panel is missing but overall they're in decent/fair shape. Asking $125 USD for both, shipped in North America.
Used cast Forced Performance Race manifold for Evo 123, DSM or Galant VR4 with 4G63. It was on my car for a couple thousand km but the car has been in storage for a decade. No issues whatsoever. Asking $250 USD shipped in North America.
SouthBay/RCI 2200cc high impedance fuel injectors with adapter clips. I was told these had very little run time, but they're way too big for my goals since we won't ever have ethanol again. Asking $425 USD shipped in North America.
New Turbosmart Gen V wastegate actuator kit for Borg-Warner EFR turbos (part number TS-0620-4012. These should fit the entire EFR turbo line (and probably others) with the supplied rods. I also have a Borg-Warner 59007119007 "cheater" bracket that is used to tuck the wastegate actuator in on the B1-frame EFRs. Tried to use them on my EFR 7670 but it wouldn't clear the compressor housing with the cheater bracket. Asking $250 USD shipped in North America.
A/C condenser fan for Evo 123. I bought this to run OEM fans on a tucked radiator setup but changed plans. It is in excellent condition, one of the best condenser fans I've seen for Evo 123 (they usually pick up a lot of road debris and rust). Asking $160 USD shipped in North America.
Matched input shaft set for Evo 1 - comprised of the input shaft, as well as the 1st and 2nd gears. This is the setup to give you the tall 2.571 1st gear and 1.600 2nd gear, and they are really hard to find. Includes the idler gear setup that is required for clearance. Nice condition, no longer needed. Price is $600 USD shipped in North America.
Used Galant VR4 RS Evo 2.571 first gear. This is the '79' gear that is identical to Lancer Evo I, it's in very nice shape - $150 USD shipped in North America.
NOS Lancer Evo I 1.600 2nd gear - MD744839. Perfect condition - $225 USD shipped in North America.
NOS Lancer Evo II/III 3rd gear - MD747250. Perfect condition - $125 USD shipped in North America.
420A ARP head studs (used) - $85 USD shipped in North America.
Big time attack rear wing for Evo 1-3 but could be used on anything. Maker unknown but it came from Japan, it has a Garage MZ sticker on it, came from a circuit spec Evo 3. The foil is aluminum and extremely light. Asking $350 USD shipped in North America.
Pair of Bride seat rails for Evo 1-3, Lancer GSR, etc. I had my pair of Bride Ergo 1 seats mounted on these, worked flawlessly. I think these are the 'MO' type, which fit a variety of different Bride and Sparco seats. Asking $200 USD shipped in North America.
2G DSM center taillight panel and left taillight. I think one of the center mounts on the center panel is missing but overall they're in decent/fair shape. Asking $125 USD for both, shipped in North America.
