***** CALLING ALL 2G DSM OWNERS ***** UPDATE PLEASE SEE REBUILD SERVICE THAT IS NOE OFFERED AT THE BOTTOM OF THIS MAIN POST!
ANOTHER RE RELEASE.....
ROUND 2 of the QUAIFE / FIBA Motorsport manual quick rack group buy batch. (2.1 ratio) vs stock 2.55 ratio
Been asked for these since the first round was closed and completed,
I am finally able to get onto these and see if people would be interested in another round of them! I have been in talks with Quaife and have the current most up to date prices for this batch.
THIS IS THE ONLY quick rack kit going for the 2G DSM! Bought to you by FIBA Motorsport as always with the innovative products
This is a full manual rack conversion! The possible use of an EPAS kit maybe required if using wider wheels over 235!
This setup was originally designed and developed for the racers that wanted faster steering response and less steering wheel input vs angle given BUT we have had many use them on the roads just fine with some going EPAS.
As just like the first batch I had arranged Mr Cole who had made some EPAS kits so anyone wishing to look into this, He will be your go to guy for that conversion.
a complete plug and play kit would be about $600-650 but you will discuss this with Mr Cole directly NOT me for this item!
A few details below to mention
This is a group buy and to proceed I need a minimum order of 35 people as previously done to have the batch made. IF the batch DOES NOT reach the numbers then all pre paid customers will receive a full refund! I have no idea on how long it will take to fill the full 35 so i tend to let this run for a good few months, so sharing may help this fill up faster.
payment is due in full to be on the list, as once I put the order in its all paid off and then I prep shipping boxes for them.
* shipping will now to be Each customer directly!
* You will need to have the pinion bearing side in the MAIN body machined out a bit and a technical drawing will be supplied as pictured! This is a simple job and any good shop can do this for you. This must be done to account for the new size of pinion shaft and to clear everything safely. you can print this drawing off to show local shops to get a rough price on this service way in advance so you are well prepared for this stage once you receive it.
* Estimated time for production from Quaife is 13-18 weeks and then I receive them and then check it over, pack them and ship them off so allow 2 weeks EST for that. shipping will be insured and tracked.
I am happy to answer any questions you may have on these. so please ask away.
** Price shipped to the USA for 1 rack and pinion set is £405 **
IF you wish for a FULL replacement / new setup I can also supply you with a full 2G V2 bump steer kit which replaces ALL the tie rods inner and outer for my complete kit! This will offer a full brand new overhauled rack system for you and will be as good as new in so many ways and last for years to come! I can discount this with FREE SHIPPING on the V2 kit if added as part of the Quaife rack and pinion set. For more details on this please send me a PM along with your order request for the quick rack set.
2G DSM FIBA Motorsport / Quaife quick rack group buy ROUND 2 update
SHARE, share and share some more
GREAT NEWS... I have managed to secure a Vendor in the DSM/EVO sector who is willing to take on the rebuild service for these quick racks, so everything from machining to rebuilding will all be done for you to make it a more direct swap for you! Hopefully this helps more with getting the numbers up and these going ahead as I dont wish to cancel this batch.
Alex over at bulletproofr.com has agreed to take this role on supporting us on this service.
How this will work...
* The price Alex @ BPR is charging is $265 for the machine work and rebuild ONLY.
This does NOT include return shipping and will be quoted at the time of request. it also DOES NOT include any extra services or parts required for the rebuild. so if you are sending in a spare core please make sure its bearings are good and seals are intact! any extras required during the process will be chargeable.
* requests are to contain the following details.
full name.
address.
phone number.
email address
( if any details alter during the process it is YOUR duty to notify BPR at once to ament this and to account for any shipping charge differences )
* You can send in your core OR a spare core purchased. send in nothing but the rack and housing and no tie rod ends etc! please pre clean as best as you can for shipping and handling of the unit.
* NO racks are to be shipped to BPR until the group buy has been confirmed as going through and payment has been sent to Quaife for the production of the kits.
* This service is purely offered by BPR so all requests, payments and contact will be DIRECT with BPR themselves via email OR fb as long as its logged.
THANK YOU ALL for the support and i now hope this helps you all out with wanting to get in on this group buy.
I am still here for advice just to note
ANOTHER RE RELEASE.....
ROUND 2 of the QUAIFE / FIBA Motorsport manual quick rack group buy batch. (2.1 ratio) vs stock 2.55 ratio
Been asked for these since the first round was closed and completed,
I am finally able to get onto these and see if people would be interested in another round of them! I have been in talks with Quaife and have the current most up to date prices for this batch.
THIS IS THE ONLY quick rack kit going for the 2G DSM! Bought to you by FIBA Motorsport as always with the innovative products
This is a full manual rack conversion! The possible use of an EPAS kit maybe required if using wider wheels over 235!
This setup was originally designed and developed for the racers that wanted faster steering response and less steering wheel input vs angle given BUT we have had many use them on the roads just fine with some going EPAS.
As just like the first batch I had arranged Mr Cole who had made some EPAS kits so anyone wishing to look into this, He will be your go to guy for that conversion.
a complete plug and play kit would be about $600-650 but you will discuss this with Mr Cole directly NOT me for this item!
A few details below to mention
This is a group buy and to proceed I need a minimum order of 35 people as previously done to have the batch made. IF the batch DOES NOT reach the numbers then all pre paid customers will receive a full refund! I have no idea on how long it will take to fill the full 35 so i tend to let this run for a good few months, so sharing may help this fill up faster.
payment is due in full to be on the list, as once I put the order in its all paid off and then I prep shipping boxes for them.
* shipping will now to be Each customer directly!
* You will need to have the pinion bearing side in the MAIN body machined out a bit and a technical drawing will be supplied as pictured! This is a simple job and any good shop can do this for you. This must be done to account for the new size of pinion shaft and to clear everything safely. you can print this drawing off to show local shops to get a rough price on this service way in advance so you are well prepared for this stage once you receive it.
* Estimated time for production from Quaife is 13-18 weeks and then I receive them and then check it over, pack them and ship them off so allow 2 weeks EST for that. shipping will be insured and tracked.
I am happy to answer any questions you may have on these. so please ask away.
** Price shipped to the USA for 1 rack and pinion set is £405 **
IF you wish for a FULL replacement / new setup I can also supply you with a full 2G V2 bump steer kit which replaces ALL the tie rods inner and outer for my complete kit! This will offer a full brand new overhauled rack system for you and will be as good as new in so many ways and last for years to come! I can discount this with FREE SHIPPING on the V2 kit if added as part of the Quaife rack and pinion set. For more details on this please send me a PM along with your order request for the quick rack set.
2G DSM FIBA Motorsport / Quaife quick rack group buy ROUND 2 update
SHARE, share and share some more
GREAT NEWS... I have managed to secure a Vendor in the DSM/EVO sector who is willing to take on the rebuild service for these quick racks, so everything from machining to rebuilding will all be done for you to make it a more direct swap for you! Hopefully this helps more with getting the numbers up and these going ahead as I dont wish to cancel this batch.
Alex over at bulletproofr.com has agreed to take this role on supporting us on this service.
How this will work...
* The price Alex @ BPR is charging is $265 for the machine work and rebuild ONLY.
This does NOT include return shipping and will be quoted at the time of request. it also DOES NOT include any extra services or parts required for the rebuild. so if you are sending in a spare core please make sure its bearings are good and seals are intact! any extras required during the process will be chargeable.
* requests are to contain the following details.
full name.
address.
phone number.
email address
( if any details alter during the process it is YOUR duty to notify BPR at once to ament this and to account for any shipping charge differences )
* You can send in your core OR a spare core purchased. send in nothing but the rack and housing and no tie rod ends etc! please pre clean as best as you can for shipping and handling of the unit.
* NO racks are to be shipped to BPR until the group buy has been confirmed as going through and payment has been sent to Quaife for the production of the kits.
* This service is purely offered by BPR so all requests, payments and contact will be DIRECT with BPR themselves via email OR fb as long as its logged.
THANK YOU ALL for the support and i now hope this helps you all out with wanting to get in on this group buy.
I am still here for advice just to note