Brian C
Probationary Member
- 17
- 5
- Sep 12, 2020
-
Wind Gap,
Pennsylvania
Ok so I'll go long story short. My 2g GSX caught on fire. Pulled everything, replaced harness and burnt/compromised components but now when car does it system/light check the CEL never lights up, EVER.
Hooked up scanner but it cannot connect to ECU. OBD2 has power, I swapped ECUs, so it does not appear to be the ECU. Check grounds, I believe everything is plugged in as I double and triple check everything. (Not saying it's impossible that I missed something so I'm open to suggestions obviously)
I also get no cranking from starter or fuel from the fuel pump unless I jump the relays, and no spark. Any ideas?
Hooked up scanner but it cannot connect to ECU. OBD2 has power, I swapped ECUs, so it does not appear to be the ECU. Check grounds, I believe everything is plugged in as I double and triple check everything. (Not saying it's impossible that I missed something so I'm open to suggestions obviously)
I also get no cranking from starter or fuel from the fuel pump unless I jump the relays, and no spark. Any ideas?
Last edited by a moderator: