AEM White Wire Connection on 1G

[bgold87]

I need to wire in my AEM Wideband, where to a run the white wire on a 1g? I found this pic on the vfaq that it's down on the passenger kick panel. All the other articles on it are missing pics.

You must be logged in to view this image or video.

 

[DSMPT]

Are you running ECMLink or standalone ECU? If you are just installing the gauge and run the stock ECU, you don't connect the white wire.

 

[bgold87]

Ecmlink

 

[DSMPT]

Then connect it to any available input. Please refer the link below.

externalsensorinput [ECMTuning - wiki]

www.ecmtuning.com

You must be logged in to view this image or video.

 

[bgold87]

Yea I saw that. Cant use pin 4 unless I’m simulating narrowband and using factory 02 which I’m not, put the sensor in the downpipe. According to ecmlink pin 15 doesn’t work with AEM and can’t use the others unless running speed density. So I’m curious what other have done.

 

[DSMPT]

Cant use pin 4 unless I’m simulating narrowband and using factory 02 which I’m not

Do you want to keep the factory O2 sensor or not? If you simulate the narrow band in ECMLink, you wouldn't need the factory O2 sensor anymore.

 

[bgold87]

Yea I would like to keep it.

 

[Vegas Smith]

Then your only other option is egr pin.