The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support Morrison Fabrication

Products the DSM crowd would like to see made

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.


Thank you! google was no help to find this.

Google is legitimately no help finding anything anymore. I used to be a wizard at finding stuff and suddenly can’t find anything.


Long story short and sparing the rant: they changed the way their algorithm works. It doesn’t search for terms it searches for what it thinks the best things you need to see are.
 
Here are a few places that everyone may not be aware of that are continuing to create products for our cars.

John Freund Racing who sells what's called piLink which is a standalone datalogger with options to add a screen to your dash. In addition he sells some cool techy gadgets for your car.

Dude's Custom Parts is based out of Germany I believe, but he makes custom billet and 3d printed parts. I wish he offered more for 1g's but he does have some pretty neat things.

DSM 3D Creations have 3d prints of many miscellaneous pieces that break or go missing over the years like screw covers, clips, retainers, and bushings.

Parts on my current wish list are a fuel filler neck, headliner, front bumper, parking brake hardware kit, and cyclone intake manifold butterfly gaskets
 
Here are a few places that everyone may not be aware of that are continuing to create products for our cars.

John Freund Racing who sells what's called piLink which is a standalone datalogger with options to add a screen to your dash. In addition he sells some cool techy gadgets for your car.

Dude's Custom Parts is based out of Germany I believe, but he makes custom billet and 3d printed parts. I wish he offered more for 1g's but he does have some pretty neat things.

DSM 3D Creations have 3d prints of many miscellaneous pieces that break or go missing over the years like screw covers, clips, retainers, and bushings.

Parts on my current wish list are a fuel filler neck, headliner, front bumper, parking brake hardware kit, and cyclone intake manifold butterfly gaskets
I got you covered on one of your wishlist!!!
The filler necks are already sorted. I have the caps now redesigned but i got both 1G and 2G jigged up. Both have been tested and fitment is good.
Im going to look at doing these next year once my other projects are done first but at least this is 1 item off the list.

All stainless means it will last a lifetime now so less worries later on and will always look great
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
 
I got you covered on one of your wishlist!!!
The filler necks are already sorted. I have the caps now redesigned but i got both 1G and 2G jigged up. Both have been tested and fitment is good.
Im going to look at doing these next year once my other projects are done first but at least this is 1 item off the list.
Take my money already! I will happily pre buy two of these xD
 
Im not accepting anything currently on these until i got my other project out the way so come feb-march 2023 then i can start getting into these again. I can come back to this thread once i got this far and all the laser cut parts priced up.
 
We’re going to need 7-bolt timing covers eventually, they’re disappearing. Also not really DSM, but Evo123 owners badly need fuel filler necks too.
 
We’re going to need 7-bolt timing covers eventually, they’re disappearing. Also not really DSM, but Evo123 owners badly need fuel filler necks too.
know anyone my end of the world who can get me one for mocking up on the filler neck? i can add that chassis to my 1G and 2G list also

Take my money already! I will happily pre buy two of these xD
just a few more on the 1G to show fitment and use of all the mounting points still
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
 
We’re going to need 7-bolt timing covers eventually, they’re disappearing. Also not really DSM, but Evo123 owners badly need fuel filler necks too.

If anyone wants one to scan I have a lower 7 bolt timing cover I can spare for weeks+ someone would need to make a mold.


Wonder how a billet one would look. :p
 
Heavy dumb and like $2000. Aluminum is $7/lb right now.
Heavy vs plastic sure but not 2k. Honda guys have them and they about $600 ish last time i looked
 
Has anyone mentioned rear window louvers for the 2g yet?
Thats kinda a custom job per car as its possible you might be one of a few for that.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top