import solutions
Proven Member
- 236
- 139
- Apr 27, 2013
-
colimA,
Texas
What boost level is wg pressure
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
It has 23 psi springs in the gate. Looking at logs last night it saw around 28psiWhat boost level is wg pressure
Not sure on hp numbers. I know stick cars making mid 500s on a hx40 at same boost level but obviously the auto sucks some of that up . Once we turn it up I have very high hopes of it seeing a 9 second passWell at that boost level final power level stills on medium 400s so time is quite right
Congrats and def if kevin put his magic on it , it will do awesome
We don’t play up here in the north . Hoping to add another 10-12lbs and see if it’ll go 9sDamn, maxin out the spring pressure like a real man.
Thank you I knew after the first pass letting out wayyy too early it was gonna be a good dayCongrats on the pb!!
Megan racing currently.Very nice What suspension coil overs do you have on your car ?
I’m hoping this cold weather breaks here in Ohio so I can get everything put on. Since we moved to the new house I do t have a garage that I can pull the car in and work on.All these pics of new parts! Need to see pics of them installed!
Time to talk to Paul about a whole new rear subframe!Finally some progress! Started with wheel
Studs then got stuck trying getting the trailing arm off. Cam bolt is froze so going to have to cut it out. Good thing I bought new ones . Going to get this wrapped up in the morning.
View attachment 657751
These were super easy to swap.
View attachment 657752
Stud installer, lug nut, and a wrench was all a I needed.
View attachment 657753
Spend 2.5 hrs fighting this thing. Couldn’t get enough leverage to get the active toe bushing out to make room either.
Honestly contemplated it this thing has been a total pita. That and the weight loss wouldn’t hurt this girlTime to talk to Paul about a whole new rear subframe!
The only downside is the impact on the budget.Honestly contemplated it this thing has been a total pita. That and the weight loss wouldn’t hurt this girl
You are right on that one . I will end up doing it eventually. Probably be one of those things I do after I get the other motor done. I did get the other rear wheel studs put in. Had to go pick up a sawzall so I can get these bolts out since they’re frozeThe only downside is the impact on the budget.