The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Kiggly Racing
Please Support ExtremePSI

Comp Clutch Flywheel and SBC Clutch

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

TommyDSM

20+ Year Contributor
241
7
Aug 2, 2003
Somewhere, New_York
Just got the Comp Clutch Flywheel and SBC Clutch. Does the Flywheel come with the correct Step Height for our cars? Or do I need to have it machined?
 
When I bought my CC flywheel the step was short at .6065 out of the box. I bought it from TMZ Performance & contacted them. At the time they had several flywheels on the shelf & measured theirs & they all measured short too. Contacted CC for help & they said that I would have to pay to get the step remachined. I bought an ACT Streetlite & it measured correctly at .610. I would measure your CC Flywheel & check. My ACT flywheel's quality was very noticeably better than the CC Flywheel I had, measured both. I did my measuring on a CMM & besides the step size measurement I checked flatness & parallelism.

You must be logged in to view this image or video.
 
Last edited:
Yeah... the digital calipers i had measured from .600 - .630... I was waiting on getting a better set. But I called CC and they stated I don't need to get it machined and it comes pre-stepped for our cars...

But I'll get it measured again to verify.

Thank you guys!
 
When I bought my CC flywheel the step was short at .6065 out of the box. I bought it from TMZ Performance & contacted them. At the time they had several flywheels on the shelf & measured theirs & they all measured short too. Contacted CC for help & they said that I would have to pay to get the step remachined. I bought an ACT Streetlite & it measured correctly at .610. I would measure your CC Flywheel & check. My ACT flywheel's quality was very noticeably better than the CC Flywheel I had, measured both. I did my measuring on a CMM & besides the step size measurement I checked flatness & parallelism.

You must be logged in to view this image or video.
When did you purchase yours? I ordered mine thru ExtremePSI and it was dropped shipped.
 
Yeah... the digital calipers i had measured from .600 - .630... I was waiting on getting a better set. But I called CC and they stated I don't need to get it machined and it comes pre-stepped for our cars...

But I'll get it measured again to verify.

Thank you guys!
Caliper is not the right tool. Depth mic is what you need.
 
Caliper is not the right tool. Depth mic is what you need.
You are correct. I was waiting to get my hands on a set today... but figured I would get an estimate with the calipers...
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top