talonater619
Probationary Member
- 11
- 1
- Mar 22, 2021
-
riverside,
California
The car is a 95 talon with a 99 engine swap.
Car cranks but won't run I have tried 3 different ecu, one 95, 97, and a 97 with ecmlink v3 and none work. I'm pretty much stuck at this point and seeing if I can get any help.
My ecu light does not turn on then off when I turn the ignition switch and am not getting fuel or spark.
Pin 80 on ecu has 12v with switch on or off
Pin 82 on ecu has 12v with switch on or off
Pin 12 has 0v with switch on or off
Pin 25 has 0v with switch on or off
Pin 38 has 0v with switch on or off
Pin 71 has 0v with switch on or off
With my mpi unplugged the black and white wire has 11.7v
with the mpi unplugged the all red wire has 0.1v
With the mpi plugged in the all red wire has 11.7v
With the mpi plugged in the black and red wire has 11.7v
With the mpi plugged in the blue green wire has 0v with the switch on or off
With the mpi plugged in the two red and black wires have 0v with the switch on or off.
Grounding Pin 5 on my mpi activates the fuel pump
I have also ran a 12v wire to pin 12 and 25 on the ecu with no luck.
Only my headlights and emergency and interior lights and door locks work, windows don't work and tach doesn't move as car cranks
Car cranks but won't run I have tried 3 different ecu, one 95, 97, and a 97 with ecmlink v3 and none work. I'm pretty much stuck at this point and seeing if I can get any help.
My ecu light does not turn on then off when I turn the ignition switch and am not getting fuel or spark.
Pin 80 on ecu has 12v with switch on or off
Pin 82 on ecu has 12v with switch on or off
Pin 12 has 0v with switch on or off
Pin 25 has 0v with switch on or off
Pin 38 has 0v with switch on or off
Pin 71 has 0v with switch on or off
With my mpi unplugged the black and white wire has 11.7v
with the mpi unplugged the all red wire has 0.1v
With the mpi plugged in the all red wire has 11.7v
With the mpi plugged in the black and red wire has 11.7v
With the mpi plugged in the blue green wire has 0v with the switch on or off
With the mpi plugged in the two red and black wires have 0v with the switch on or off.
Grounding Pin 5 on my mpi activates the fuel pump
I have also ran a 12v wire to pin 12 and 25 on the ecu with no luck.
Only my headlights and emergency and interior lights and door locks work, windows don't work and tach doesn't move as car cranks
Last edited by a moderator: