AWD-Tony
Proven Member
- 6,801
- 3,735
- Sep 11, 2017
-
Cincinnati,
Ohio
I recent built my bottom end and installed everything. It would start smoking in about 20 seconds from cold start. Today I removed my manifold to see if it’s one cylinder or more and I don’t see any smoke. There’s ZERO shaft play and I even pulled my bov off while it’s running/smoking and didn’t see/feel anything so it’s not the cold side.
Compression is 110 across the board
Spark plugs look fine
Picking up leak down tester today at 3pm
Pressurized coolant to 15psi and it would drop very slowly. 1-2psi in a few hours.
There are signed of coolant on the oil cap
Smoke does get thicker
Compression is 110 across the board
Spark plugs look fine
Picking up leak down tester today at 3pm
Pressurized coolant to 15psi and it would drop very slowly. 1-2psi in a few hours.
There are signed of coolant on the oil cap
You must be logged in to view this image or video.
You must be logged in to view this image or video.
Smoke does get thicker
You must be logged in to view this image or video.