The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support JNZ Tuning
Please Support Morrison Fabrication

*** (CLOSED) NEW ITEM, 2G oem billet Anti roll bar brackets ***

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

EC17PSE

Freelancer
5,867
3,448
Nov 1, 2008
London, UK, Europe
Whats up tuners. Only me again.

This one is a little different as i never intended it to be an item to list but i was approached by a few on here and FB about them so as requested here is what im offering.

These are going to be OEM billet CNC Anti roll bar brackets!

I will be running these along side the EVO rear ARB adaptors if those might interest you for a performance gain ( REAR ONLY ) link here https://www.dsmtuners.com/marketpla...ti-roll-bar-billet-brackets-sway-bar.740/edit

These will replace your steel stamped units with a nice alloy machined piece fitting the same bushing. It will be a bolt on situation and will include new hardware. These will come in black anodize finish

Picture is for reference only as to what a rear would look like for an example. Front will have the angle on it to fit the oem subframe.

full set

@NWHTanK (AWD)
@Eclipse 1998 (AWD)
@Esquire the Bold (AWD)
@miguelmcv (AWD)
@calgst95 (AWD)
@609DSM (AWD)
@TommyDSM (AWD)
@Turbo_Timmy (AWD)
@Jharris91 (AWD)
@talon91tsiawd1 (AWD)
@chinola69 (AWD)
@DSM 99 (AWD)
@tunernewb92


Front set only

@Mitsubishiown

Rear set only

@electrohead
@my98gsx

You must be logged in to view this image or video.
 
Last edited:
I can offer anodising but this is the deal,

Its min order on these volumes and more items being coated should mean less so for now the min order would be about 11 - 15 per order as i could not be 100% till they got the parts for the final cost so this is an average now.

Black would be top of the list

I could do clear if needed but thats also another min order charge. And i would much prefer 1 color then 2 to stop me making mistakes haha
 
Nice product, just a quick question, it works with the OEM sway bar, but how about if we have upgraded sway barks which is thicker, would it be usable with it?.
Yes it will work exactly the same way the oem bracket will,the bush is what gets changed for the bigger hole. The outside remains the same so the oem bracket can still be used
 
Aftermarket bars like R&M use a thinner support bushing and you use the factory strap,bracket,mount or what ever its called.
I almost wanna say they are called saddle clamps or saddle brackets. I guess they can be called many things depending who knows it by what
 
Ho I see, I was asking because when I had a 3g rear sway bar, I had to use the 3g bracket, the 2g was small and didn’t allow the sway bar was to thick.
Thats right on the 3G it is bigger. Same as the awd rear bracket vs fwd rear bracket.
 
Um I'm no longer fwd, I'm converted;)
You must be logged in to view this image or video.
oh LOL i read your profile and took that haha
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top