The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support STM Tuned

2G Engine mounts

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Rockauto shows the same numbers except for the Transmission Mount - Left
Here is a link to the site:
https://www.rockauto.com/en/catalog...4,transmission-manual,transmission+mount,8756

The front and rear mounts are the exact same between the 4g63 and 420a versions. You'll be fine to use those billet mounts you mentioned.

I can’t tell as far as the back one but the front motor mount on my 420a is the same as my gst spyder.

thanks for all
 
The front one should be the same. The rear one should be a mirrored part, so it probably won't bolt into the subframe properly. Could be wrong, but that's how I've remembered it. If you look at these two pictures, the top one is my GSX, the bottom one is the GS I had a couple years ago. The mounts do look the same, but if you look closer, the mount itself looks to be in slightly different spots on the base plate. I say try it, the worst that'll happen is you can't use it.

You must be logged in to view this image or video.


You must be logged in to view this image or video.
 
Last edited:
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top