LumpyVR4
Supporting Member
- 91
- 49
- May 21, 2014
-
Sydney,
Australia
After opinions about the turbo in the link below. Do you think it is genuine? Can I run the internal gate, at least initially? Is it a good choice for the rest of my build?
Street car. 6 bolt, 94mm stroker. 8.5:1. 2G head cnc'd. Kelford cams 264 / 272. +1 valves. Beehives for 9K but will probably be shifting at 8k max. Intake is cleaned up evo 3 fed buy a 70mm S90. 1600cc injectors with a view to go E85, but supply here is a little bit of a drive, so 94 / E85. Max boost level 30 psi.
I was looking at this because it has a water jacket.
Turbine Wheel : (Ind. 70. mm, Exd. 60. mm, 11 Blades)
Comp. Wheel : (Ind. 53.91 mm, Exd. 78. mm, Trm 5.09 mm, 7+7 Blades)
https://www.aliexpress.com/item/32961003317.html
Street car. 6 bolt, 94mm stroker. 8.5:1. 2G head cnc'd. Kelford cams 264 / 272. +1 valves. Beehives for 9K but will probably be shifting at 8k max. Intake is cleaned up evo 3 fed buy a 70mm S90. 1600cc injectors with a view to go E85, but supply here is a little bit of a drive, so 94 / E85. Max boost level 30 psi.
I was looking at this because it has a water jacket.
Turbine Wheel : (Ind. 70. mm, Exd. 60. mm, 11 Blades)
Comp. Wheel : (Ind. 53.91 mm, Exd. 78. mm, Trm 5.09 mm, 7+7 Blades)
https://www.aliexpress.com/item/32961003317.html