The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Rix Racing
Please Support Morrison Fabrication

1G Is this oem?

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

My 90 GSX has that exact same cap Tony. I say yes.
 
Could be a generic radiator cap. If it's from Mitsubishi, it's from 3g, galant or so, not from 1g 2g DSM. The stock 1g 2g cap pressure is 0.9 bar, not 1.1 bar. Speaking based on JDM spec but I assume it's the same between the US and Japan.
 
Well its a mate to my 90 GSX's radiator cap. :)
 
I had a new generic one (.9 bar) on there, but it leaks ever so slightly. The lip had a small chunk missing where the cap screws on, so I put some jb weld or quik steel and sanded it flat. I'll try this cap and see what happens. If it still leaks, I'll swap out the housing. Thanks gents!!
 
I had a new generic one (.9 bar) on there, but it leaks ever so slightly. The lip had a small chunk missing where the cap screws on, so I put some jb weld or quik steel and sanded it flat. I'll try this cap and see what happens. If it still leaks, I'll swap out the housing. Thanks gents!!
I looked at the pic with a bigger screen and now can see a Toyo's stamp. I am not sure if they supply Mitsubishi but they do Honda. Their quality is very good, as good as Nippon denso.
 
I looked at the pic with a bigger screen and now can see a Toyo's stamp. I am not sure if they supply Mitsubishi but they do Honda. Their quality is very good, as good as Nippon denso.

I think you're right about it being a honda cap. I knew I've seen this cap before.
 
You must be logged in to view this image or video.
You must be logged in to view this image or video.
 
I have a 15 lb cap with a release lever on it on the Blue Talon. I like being able to release any pressure without twisting and getting a valcano of coolant everywhere, not to mention the inherent harm that it can cause to human flesh....we've all been there I bet.
 
You must be logged in to view this image or video.
You must be logged in to view this image or video.

That cap looks like it’s holding so that’s a good sign.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top