The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support ExtremePSI

T56

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Rocky123

Probationary Member
2
0
Sep 16, 2019
Brooklyn, New_York
Does a T56 Bolt up to an eclipse block with an adapter plate made and will it support the torque?
 
Would you please stop posting pipe dream questions. Learn some stuff by reading and doing. You need a ton of experience to pull off anything you've suggested in any thread you've posted or a very very fat wallet. I feel it necessary to call you out. You do not have the experience or skills to do any of this or you wouldn't be asking such basic basic questions. Points for enthusiasm but that's it.
 
As I said in your other thread, straight-cut dogbox T56. A stock T56 won't do it, but a T56 with full aftermarket gear kit will (this is going to be well over $10,000 with the adapter parts and will drive like shit on the street). Heavily fortified synchronized T56s may do it, but they would probably wear out quickly. A TR6060 may make things a bit easier, but no less cheaper.

If you don't know the difference between synchro & dogbox, or straight cut gears vs helical cut gears, you have a ton of reading to do.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top