The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support Rix Racing

1G Cerakote ceramic coating

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

AWD-Tony

Proven Member
6,801
3,735
Sep 11, 2017
Cincinnati, Ohio
I got my manifold and turbo housing coated. Are they suppose to coat the matting surface? There’s a little splatter on the manifold. What’s the proper way to flatten it? Razor or sand it?

Thanks
Tony

You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
 
if its bad go 80 then 180 then 320(optional) with the flattest/longest/most rigid block you have/can find

Ive had the Durablock set for years as an example for you.

doesnt look like theres much on the flanges though. if its just that dot then knock it of with a razor blade
 
Last edited:
if its bad go 80 then 180 then 320(optional) with the flattest/longest/most rigid block you have/can find

Ive had the Durablock set for years as an example for you.

doesnt look like theres much on the flanges though. if its just that dot then knock it of with a razor blade

Thanks evl! That’s the worst. Couple of other spots but nothing major. Wasn’t sure if it’ll start peeling the ceramic.
 
Mating surfaces (with a little splatter like yours) were coated on my headers for my GTO and downpipe on the Talon. No issues with either. Headers has been on for over 5 years too.
 
Mating surfaces (with a little splatter like yours) were coated on my headers for my GTO and downpipe on the Talon. No issues with either. Headers has been on for over 5 years too.

Ok thanks man! I used a razor to remove it and it flaked off pretty easily. Wasn’t sure if it’ll cause it to peel but think I should be ok since it’s on the matting surface. Awesome that it lasts a long time.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top