The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support ExtremePSI

1G Dual piston caliper bolt

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

AWD-Tony

Proven Member
6,801
3,735
Sep 11, 2017
Cincinnati, Ohio
Hey guys! One of my caliper bolts broke off in the bracket. Luckily I was able to get it out by heating the backside. Be careful because this thing shot out like a bullet and I can’t find where it went. Any hooo I need to know the part number for this bolt. From what I’ve read, seems like all the hardware are the same in the dual piston set up but I’m not 100. Does anyone know the part number for this bolt.

Thanks Tony

You must be logged in to view this image or video.
You must be logged in to view this image or video.
 
I would just get these from Rockauto. They're under brakes>guide pins. You broke the bolt that has the bushing. If you can't find the lost end & retrieve the bushing you should also buy some new bushings too, again from Rockauto.
 
I would just get these from Rockauto. They're under brakes>guide pins. You broke the bolt that has the bushing. If you can't find the lost end & retrieve the bushing you should also buy some new bushings too, again from Rockauto.

Thanks Mello! I actually found it. When you say bushing, is that the rubber tip that slides in on the end? Also, do you search under 95 and up gsx? Thanks!

You must be logged in to view this image or video.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top