Rollie73
Probationary Member
- 12
- 2
- Sep 11, 2018
-
Sydney,
NS_Canada
Hey folks,
Since I first posted....Ive been doing lots of digging and learning on my little 97 Eclipse Spyder. Ive run up against an issue now that has me a bit stumped.
I cant seem to find any power at the TCM.....the FSM says it should be 2 blue with red stripe wires coming into pin 12 and 25 on the connector but Im not getting any voltage at those points. The fuse that is supposed to feed it is ok. I would run a new wire to it for a temporary test to see if the car comes out of limp mode and actually shifts but dont want to apply voltage to the wrong spot and fry a potentially good controller.
Any advice would be appreciated.
Since I first posted....Ive been doing lots of digging and learning on my little 97 Eclipse Spyder. Ive run up against an issue now that has me a bit stumped.
I cant seem to find any power at the TCM.....the FSM says it should be 2 blue with red stripe wires coming into pin 12 and 25 on the connector but Im not getting any voltage at those points. The fuse that is supposed to feed it is ok. I would run a new wire to it for a temporary test to see if the car comes out of limp mode and actually shifts but dont want to apply voltage to the wrong spot and fry a potentially good controller.
Any advice would be appreciated.