sacrileger
Proven Member
- 288
- 43
- Jun 26, 2016
-
Orillia,
ON_Canada
I am in the process of replacing 4g37 engine with 4g63 n/t motor. I pulled the engine bay harness from a 92 Talon which was equipped with A/C and cruise control and installed the harness in a '90 laser w/o A/C or cruise. All connectors fit except two 4g63 connectors that have more pins than the female 4g37 interior connectors.
This one is located on the passenger side under the dashboard. The 4g63 connector has extra 2 pins:
And this one is located under the console right by the ECU. The 4g63 connector has 6 extra pins. Not all are wired.
How do I rewire the connectors so that they are compatible and functional?
This one is located on the passenger side under the dashboard. The 4g63 connector has extra 2 pins:
You must be logged in to view this image or video.
And this one is located under the console right by the ECU. The 4g63 connector has 6 extra pins. Not all are wired.
You must be logged in to view this image or video.
How do I rewire the connectors so that they are compatible and functional?
Last edited: