The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Fuel Injector Clinic
Please Support STM Tuned

ECMlink NO DSM TUNERS IN CENTRAL FLORIDA!!

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Vin

Proven Member
153
14
Feb 23, 2016
New Smyrna beach, Florida
I have called KINGS,REAL STREET, OSTAR and had tried redline tuning with 0 results.
I have a blank check book to finish my car and not one person on a DSM only forum could refer me somebody on the East Coast near Central Florida to work and tune my vehicle I have ecmlink.
I would not recommend buying a DSM if you live in Central Florida there is absolutely I would not recommend buying a DSM if you live in Central Florida there is absolutely nobody that will or can work on it properly
 
Work on it yourself and have Scott Laird tune it.
 
Who is Scott laird...and young man I broke my back twice and I'm retired.
The point made is that no shops in central Florida wrench on DSM.
Please give Scott laird my info to tune my ECM link
 
I'm sorry to hear about your back.

Scott Laird is from Panama City, I usually contact him on facebook. I'm not sure if he is on here. His profile picture on facebook is a FL plate that says EATS V8S.
 
I have no social media no Facebook no Twitter I don't I have no social media no Facebook no Twitter I don't do any of that nonsense is there anyway you can message him for me I'll literally pay him to come out here in tune my car and I'll pay him well..
Have him email me :[email protected]
-vin
 
Vin I know how you feel. My car is pretty much done and needs to be tuned also. And like you I rather have someone that is familiar with the ECMLink program to tune it. I don't have any social media stuff also so it makes it kinda hard. Kings told me if it was evo scan it would be no problem but I can bring the car and they can mess with it and figure it out (big no no for me). Real street said they only tune full standalone ecu vehicles. I didn't try the rest but you did and that was no better LOL. I was going to try Tampa next. I tried messing around with the program a little and got a little out of it, but I'm no tuner. I'm good with the wrenching part but not the tuning part and I don't want to blow up my car before I even get to enjoy it.
 
I may have I may have good news for both of us I also have a Nova with l76 6.0l nitrous motor and I was talking to my mechanics and he says he may know somebody who can tune ecmlink 4g63 stuff I will let you know I just got off the phone with him this morning they just opened up the shop. Hopefully we can find somebody competent.
 
Vin I know how you feel. My car is pretty much done and needs to be tuned also. And like you I rather have someone that is familiar with the ECMLink program to tune it. I don't have any social media stuff also so it makes it kinda hard. Kings told me if it was evo scan it would be no problem but I can bring the car and they can mess with it and figure it out (big no no for me). Real street said they only tune full standalone ecu vehicles. I didn't try the rest but you did and that was no better LOL. I was going to try Tampa next. I tried messing around with the program a little and got a little out of it, but I'm no tuner. I'm good with the wrenching part but not the tuning part and I don't want to blow up my car before I even get

Istarted with Dennis King at Red Line In Daytona who had my car for one and a half years almost and I called Kings Performance ostar, Real Street, Titan a place in Jacksonville and about 6 others there really is no DSM friendly shops around if that guy Scott lard or whatever his name is is smart he should start a DSM tuning shop he would make thousands
 

Attachments

  • 20170820_203929.jpg
    20170820_203929.jpg
    184.8 KB · Views: 149
  • 20170820_203814.jpg
    20170820_203814.jpg
    145 KB · Views: 144
PM Miliman13 on here. He is in Tampa and does his own DSM fabrication.

He may have a tuner to recommend for you.
 
Scott laird is "v8s_are_slow" on this forum
you may try to PM him.
If you're looking to have work done/tune I would recommend Mike Amerson at TDC performance in Mobile, AL.
Obviously you would need to trailer or tow the car to him but i consider him one of the best in the south.
 
PM Miliman13 on here. He is in Tampa and does his own DSM fabrication.

He may have a tuner to recommend for you.
Flattered.



Im surprised about the absence near the Orlando area..
However Tampa area is a bit more saturated with options.


You dont "just" need a tuner.
But maybe a mentor/teacher to help you become more familiar and comfortable with your software.
 
a customer doesn't need to learn everything about their car that's why there are tuners to bring them to ,that is their area of expertise I don't need to make that my area of expertise I'm retired I want to enjoy life .I just found a tuner through my domestic mechanics that are building my LS3 Nova.. so I'm all set
 
I don't think there are any DSM specific ss

When i was racing in the 90s the Supra was and always will be a great car and now the GTR has taken that Crown but to me the GTR is like a 67 through 69 Camaro and the Supra is like a notchback Mustang everybody and there sister could go fast in one because it's done before.. the 4g63 is getting more popular with swaps look up
"
"4g63 everything "
on YouTube

also you have to look at the demographic also you have to look at the demographic there are people that can't shell out 45 to $90,000 for a car and if there's a specific shop that focuses on dsm's and other cost-effective Imports I think it would be a great niche market especially now since I see with this one post I made how many people can benefit from a DSM shop in Volusia County or Central Florida at the least
 
It won't matter if you found a tuner if you keep making pulls like the ones you posted pictures of. ECMlink is pulling 11 degrees of timing up top which is a healthy dose of engine knock.
Also I hope that you're tuner is going to stick the car on a dyno equipped with a wideband readout as I don't see one in your logs. Any street tuner is going to have a hard time making accurate adjustments if you aren't logging a wideband for feedback.
I also forgot about drunkman tuning(Anthony Berry) just in case your current tuner doesn't work out. He's in FL somewhere however he travels a lot to tune so I'm unsure of his availability.
 
I've seen them tune from all over the state,but I think the majority of there business is in the Orlando, Sanford area. I saw you dont do social media at all thats why i posted the link to their facebook page as you can still click that link without an account and still see all there contact information.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top