The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support Morrison Fabrication

Good machine shop in Tampa bay area

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

cookb8419

Probationary Member
14
0
Apr 7, 2012
Gibsonton, Florida
Hello all, I'm looking for a good machine shop in the Tampa FL area that has a good reputation and knows what they are doing with our engines.

I need the cylinders honed, crank checked and new pistons pressed on my stock 1G rods.
 
You're in the wrong section.
Go to the local tab at the top of page .
This has been discussed there already and you can use that info to make a decision .
I have tried the local section but I have not received any replies, also the discussions that I found on there about machine shops are not current and are many years old.
 
i used to build engines in tampa. can I ask why you are installing new pistons on stock rods? because when a piston or piston ring fails it always ruins the cylinder wall. a hone of cylinder cannot correct .
 
i used to build engines in tampa. can I ask why you are installing new pistons on stock rods? because when a piston or piston ring fails it always ruins the cylinder wall. a hone of cylinder cannot correct .
My cylinder walls have ring marks from being seized, I think. If you check out my profile I have pictures of the cylinder walls. I have a set of .020 pistons to go in on the rebuild.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top