The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Morrison Fabrications
Please Support Fuel Injector Clinic

2G BLOWN 30A FUSE (SOLVED)

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Cynxe

Proven Member
265
6
Feb 19, 2015
Ottumwa, Iowa
What is this connector? I keep blowing the 30a ignition fuse, and ive tracked it all the way down to this connector, fuse doesn't blow with this connector unplugged.
 

Attachments

  • Snapchat-3798256409867468601.jpg
    Snapchat-3798256409867468601.jpg
    197.4 KB · Views: 150
I thought I had it identified but man there are so many connectors in this area, trying to identify it on the diagrams is extremely difficult. Can you get another picture maybe pulled back a ways, so I can see what is around it.

On this topic, what if any aftermarket accessories do you have wired in?
 
I thought I had it identified but man there are so many connectors in this area, trying to identify it on the diagrams is extremely difficult. Can you get another picture maybe pulled back a ways, so I can see what is around it.

On this topic, what if any aftermarket accessories do you have wired in?
I have a wideband, and thats it. There are no other electrical components
 
Well then here. See if you can figure it out. I'm still not really sure what angle I'm looking from anyway.
 

Attachments

  • Eclipse-Electrical Connectors-Dash Center Console.pdf
    1.2 MB · Views: 135
There's no publication that shows what each pin of those connectors go to. However you can see which devices are on each car's harness by looking at the "configuration diagrams" in the factory manual (http://www.scribd.com/doc/17887698/97-99EL). It identifies which connector identifier is for what device on which harness (eg. B-24 is Blower Motor on the Dash harness "B"; C-08 is the Defogger Switch on the Instrument Panel harness "C", etc).
 
Last edited:
Turned out to be the engine harness cut into from rubbing the axle, problem is fixed, thanks for. The help.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top