The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support RTM Racing
Please Support Rix Racing

Products the DSM crowd would like to see made

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

A aftermarket dash would be nice seeing it's impossible to find a oem on in good shape that's not cracking or peeling.

1g radiator brackets

This! I would prefer an all aluminum dash for racing applications as well!

Also an aluminum drag racing spoiler for 1g's would be nice!
 
A printed ABS cover sounds more like a downgrade from the OE steel cover...
I was thinking more in terms of the plastic 2gb covers, but yeah I agree with the steel one. It's solid, i'm just going to repaint it soon because that wierd green paint looks bad oxidized.
 
The door trim piece that the window switch panel screws into. All the screw bosses on mine are broken, so it sits down in a home bc I haven't had time to try to find a used one. Also in general I noticed there is a lack of parts made for restoration purposes. Also need a new dimmer switch for the interior lights. I had been looking for an A pillar from piece too bc the company that poor my windshield in broke one of the tabs off, but instead I got a gauge pod that replaces the A pillar trim piece altogether. There are other little things wrong with the interior that I wish i could fix.
 
The door trim piece that the window switch panel screws into. All the screw bosses on mine are broken, so it sits down in a home bc I haven't had time to try to find a used one. Also in general I noticed there is a lack of parts made for restoration purposes. Also need a new dimmer switch for the interior lights. I had been looking for an A pillar from piece too bc the company that poor my windshield in broke one of the tabs off, but instead I got a gauge pod that replaces the A pillar trim piece altogether. There are other little things wrong with the interior that I wish i could fix.

I fixed the bosses on mine by placing the screw in where it should be and then using JB stick weld. The stuff that comes in a plastic tube and you nead it together. Just wrap it around the screw and down the remainder of the boss. Works great.

Make sure you sand the plastic a little first to give the JB a little something more to grab to.
 
I don't know about some of you guys but i am sure the daily drivers would like a upgraded drink holder. I am modding mine. That thing is such a pain in the ass. Especially when driving in the dark and trying to put a drink in there.
 
LOL I thought of that too. But I don't have a Dsm anymore to test fit anything with
 
Whats wrong with the drink holder?
Yeah, idk either, still think the aluminum cas top would be great along with a set of stainless allen Hardware cause screw those tapered flat heads. Lol.

Also - Carbon Fiber cowl. Evo guys have it.. It cleans this place up a ton. Or aluminum. I could deal with either!! CF is preferred.
You must be logged in to view this image or video.
 
What about a "DSM" logo or sticker that is of high quality. Something OEM +

I bought one years ago that said dsm and it was in the shape of the old Eagle talon logo. I can't seem to find them online now...

Sucks! I really liked that logo - wish I never sold that badge or that car LOL
 
intake manifold for 2g 420a for n/a that has bigger runners , and a plenum that is designed to help distribute air evenly to all the cylinders to reduce air turbulence inside the intake manifold and head
 
I would like to see/buy a vent for the 2g front bumper to the radiator similar to the 350Z one on eBay, but following the angles of the headlights and the Mitsubishi logo in the center. Maybe with a black mesh grill in the center or a divider across that could be designed to direct wind over a larger area of the radiator. Not just a corner of it
 
There was a set of metal handles for sale on Facebook less than a week ago. I wish I could have gotten them so as to have a mold made and produce them. God knows it would be an amazing part to have available again.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top