The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support JNZ Tuning
Please Support STM Tuned

Stainless Steel Brakes Lines on sale, custom colors available at JNZ Tuning

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

DSSA

Supporting Vendor
724
677
Jul 26, 2002
Hatfield, Pennsylvania
Hey guys,
We have dropped the prices on our stainless steel brake line kits for the 1G, 2G and Galant VR-4.

We are also now offering the following color options:
Clear (our traditional protective coating)
Black (if you want to keep it looking as stock as possible)
Charcoal (a bitter darker than clear, but still translucent)
Blue
Red
Green
Yellow
All colors besides black are translucent and still show off the stainless braid of the brake lines.

Additionally we can customize the lines for you as well. Have a 1G car and running 2G or Outlander brake calipers with the banjo instead for the flare fitting? No problem! Most "tweaks" like this do not cost extra either. If ordering online please place a note in the comments section, or call/email us before ordering.


You can order here:

Brake Lines : JNZ Tuning

You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.
 
2g FWD with GSX front calipers have the banjo fitting if I am not correct. I don't remember, it's been a few years since I was down there. So, the banjo fitting can be swapped at "no extra charge?" How long will this deal be going on? I am very interested, but just spent a lot of $$$ this past week and will splurge for a great deal!!
 
2g FWD with GSX front calipers have the banjo fitting if I am not correct. I don't remember, it's been a few years since I was down there. So, the banjo fitting can be swapped at "no extra charge?" How long will this deal be going on? I am very interested, but just spent a lot of $$$ this past week and will splurge for a great deal!!

The off the shelf 2G lines use a banjo fitting on the front caliper and a flair on the rear. As long as your front calipers are from a 2G GSX, our later model 3000GT or Diamante, they should have the banjo fitting on the front already.

We don't have a end date set, but will post up here when it is coming to a close.

Let us know if you have any more questions.
 
Need a color scheme but cannot envision the colors haha. I want to run Brembo's and my car is forest green. Scheme me!
 
Need a color scheme but cannot envision the colors haha. I want to run Brembo's and my car is forest green. Scheme me!

That can be a bit subjective.... will you be keeping the Brembo calipers red or changing to a different color?
 
I'm interested! 3000 GT front calipers and 1G AWD rear. What am I looking at for cost?

No extra cost, $109.99
Just let us know if you have a color preference for the coating on the lines and where you want them shipped to.
 
I'm going to order the charcoal lines, for a 2G 1998 GSX with Brembo calipers front and rear. My front lines are already stainless, but the rears are OEM (odd, right)? Should I just give you guys a call and get it all setup? Plus this setup would match the brakes on my gsxr1000 too (translucent/smoke spiegler lines and gold calipers/banjo bolts)! Thanks for sticking with us JNZ. Awesome work guys, even if it is the "little stuff"!!! Thanks.
 
I'm going to order the charcoal lines, for a 2G 1998 GSX with Brembo calipers front and rear. My front lines are already stainless, but the rears are OEM (odd, right)? Should I just give you guys a call and get it all setup? Plus this setup would match the brakes on my gsxr1000 too (translucent/smoke spiegler lines and gold calipers/banjo bolts)! Thanks for sticking with us JNZ. Awesome work guys, even if it is the "little stuff"!!! Thanks.


We can absolutely offer that combo, personally charcoal is my favorite color on the lines! Call in the order, or when placing the order online, just make a note in the comments that you are using EVO 8/9 calipers front and rear, as they use a banjo fitting in the back and the 2G uses a flare fitting on the rear axle.

Thanks!
 
A set of 2G red lines we just had done for a member on here:

You must be logged in to view this image or video.
 
Just to leave positive feedback, I put a set of these lines on my fathers car, probably about 2 years ago. No problems. Good pedal feel. Car is daily driven year round in Sun/Snow. Was happy with the coating, I just went with clear. I also picked up Hawk Pads and Hawk Rotors from JNZ for his car and the car stops on a dime.
 
Guys I can tell you these lines are a great quality piece and at a reasonable price. I ordered some for my car in red to match my brembo's but ended up having to use them on my buddy's car when one of his stock lines went. I will be ordering another set for my car. The red's match perfectly to the brembo red.

JNZ Tuning is always a awesome company to deal with and always has great customer service and all around some great people.
 
Seth & Jeff,
Thanks for your business over the years, and happy to hear the lines are working out for you!
 
Here are some 2G lines done in charcoal coating, setup for EVO 8/9 Brembo Calipers all around:

You must be logged in to view this image or video.


Here are some 1G AWD lines done in black:

You must be logged in to view this image or video.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top