The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Morrison Fabrications
Please Support Rix Racing

crank shaft boit size

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

jacob238

10+ Year Contributor
30
0
Sep 5, 2012
Junction city, Kansas
Could anyone give me the size of the crankshaft bolt size? I have misplaced mine, and don't know the thread count, what size, and how long.
 
I've already went to the yards are my town and none of them have eclipse, talon, neon, or seabrings. I've checked 4 yards, 2 in my town, and 1 20 miles west, and another 40 miles east.
 
You will want to get the specific bolt from the dealership. If you use a cheap bolt in there, you take the chance of snapping it off in the crank.
 
Well my previous motor before pulling it, the crankshaft was stripped out, so I tapped it, and upgraded to a bigger bolt. I used a grade 8 bolt. But the issue with that was it wouldn't pull the pulley all the way on. So it caused belts to shred every 2 weeks or so. But due to damage to my crank now I have to swap motors. Thanks for the replys thoughs! :) much greatly appriciated!
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top