The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support Fuel Injector Clinic

Installing internal gate on BEP HX40 housing.

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

That flapper is so small it would fall right through the hole in the Bullseye housing.

It's highly recommended that you do not use an internal gate with a HX40. It's also highly recommended that should you choose to do so, you buy the hardware from Bullseye or one of their dealers so it fits properly.
 
That flapper is so small it would fall right through the hole in the Bullseye housing.

It's highly recommended that you do not use an internal gate with a HX40. It's also highly recommended that should you choose to do so, you buy the hardware from Bullseye or one of their dealers so it fits properly.

I didn't know it was something they actually sold. SUppose I can try to contact them and ask.

Thanks.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top