The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support Fuel Injector Clinic

the rebirth of the 98 awd spyder after 10 years of storage

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

new bumper was here when I got home for work.
IMG_20120223_230452.jpg

now to keep the green 2gb talon bumper or sell it
 
Last edited by a moderator:
got the afpr put on the car. mounted it were there was 2 holes that are factory so that is were it went for now. I might move it some time but did not want to drill holes in the the car. Also put in the wally 255 that is modded.
IMG_20120225_181025.jpg

Got the color matched 2gb talon bumper put on. Got it trimmed just to make it fit. look 1000 times better than the green one since it match's the car.
IMG_20120226_143317.jpg


I raised the car up today also. 1/4in in the front and 1/2in in the back. So no I should have plenty of room for the new rims. The rear Qt. panels now have 1.75in from tire to Qt. panel. Before I could just get a finger between them.

I went to start it for the 1st time and the miata battery is junk so I have to get a new battery tomorrow.
 
Last edited by a moderator:
had craig (my brother) get me a new miata battery at work since the one was junk.

Today I scored 2gb talon door strip's and a talon 2gb rear bumper both of them are cayenne red pearl so the car will be all one color but the 2ga talon twisty skirts that are red. Just have to wait to for them the show up. Got them from tonyseagle

the front diffuser will be her on friday also.
 
Where did you get these? You make me jealous, every part I'm trying to buy is shipped to your door :( LOL.
I got the door strips from tonyseagle. Also got the 2gb rear bumper from him :)

Got the strips on the car. Big thanks to tonyseagle for making a template for me.
IMG_20120304_132029.jpg

got the holes marked,drilled, and painted the bare metal.
IMG_20120304_134346.jpg

IMG_20120304_134350.jpg

Installed
IMG_20120304_165713.jpg

IMG_20120304_165732.jpg


now the not so happy. I did not even think about it the front diffuser is for a eclipse 2gb bumper and not a talon 2gb bumper. So the holes are in the wrong spots. With it lined up with the holes it does not stick out the 2in that it should. I moved it out the 2in so it is right and I like the way it looks.
IMG_20120304_173006.jpg

and the problem
IMG_20120304_172927.jpg

IMG_20120304_172935.jpg

3.5in to short to the back of the bumper :(
IMG_20120304_173053.jpg

So it looks like I will be selling it now
 
subscribed ./

Very nice build you have going on here. :)
 
Looking good! Are you putting the Talon spoiler on as well?

The car will not have a wing on it. It will get a carbon trunk lid if I can find one I will buy it other wise I will just get some carbon fiber and resson and wrap one of the trunk lids I have.
The talon wings will not work on a spyder. the lower thumb nail wing sits and is shaped to the hatch. the tall 2gb talon wing bolts to the hatch around the glass so that is out also.
 
Hey let me know if you find a hook up on buying a carbon fiber trunk for the spyder! Great job man =) P.M me if your still selling the diffuser with how much shipped to 80260 . Im keeping an eye out here locally for you on those black seat belts and rear seats. Id sell my rear seats BUT it really looks better than the tan so im sorry man=) Ill still keep an eye out. GREAT WORK MAN
 
Awesome build!

Anychance you remeber the measurments for the holes you made to put on the talon door strips? I'm getting ready to install mine but haven't been able to find what the proper location to mount them is.
 
Awesome build!

Anychance you remeber the measurments for the holes you made to put on the talon door strips? I'm getting ready to install mine but haven't been able to find what the proper location to mount them is.

I just used the tempplate to drill the holes on the car. I still have it send me a pm I can send it to you if you want to use it

no more big ### green rims. Just got the fronts done today. 3 coats od plastidip on the face and in side of the rim. Just have wait for them to dry all the way to put them back on
Last coat on the top
IMG_20120311_162218.jpg

Both drying now
IMG_20120311_192657.jpg
 
It's simple.

cut the defuser down the center. expand it to the width you want, lay tape on the concrete in the center where you can use a plastic product to fuse the gap and mend it back together, lay it smooth and thick.

when dry, within seconds, sand the front where it's seen and re-spray balm it black, it would take a maximum of 30 min to fix this issue. :thumb:

If it's fiberglass, use the same method with glass material and resin.
 
I am just selling it. I have one for the talon bumper on the way. I could fix it if I really wanted to since I am a body guy but I am to lazy to do it when I got one cut to the right size for the talon bumper.

started on the back rims
IMG_20120312_140025.jpg

put the fronts back on
IMG_20120312_131926.jpg

IMG_20120312_131934.jpg
 
Last edited by a moderator:
got them all back on the car now. They look so much better of the takata green. I will have them powder coated when I need to buy new tires some time but the tires dont have many miles on them so at least a few summers left.
IMG_20120313_151317.jpg

IMG_20120313_151356.jpg

IMG_20120313_151343.jpg

IMG_20120313_151327.jpg
 
Last edited by a moderator:
Oh yeah that looks wayyyy better. Front end looks sweet
 
Jealousy sets in.*** I think the idea of a 2gb talon tsi awd spyder is just awesome.
 
got the 2gb talon front diffuser the other week. It will be attached with duz fastener's all ready have the base and rivets just need to get them mounted to see how long of screw ends it will need. Just will say they are for airline use
IMG_20120328_103236.jpg
 
Last edited by a moderator:
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top