dsm-onster
DSM Wiseman
- 8,592
- 124
- Jul 11, 2004
-
Bloxom,
Virginia
The wh1e and big h1c that are in my possesion both have the same total diameter and outlet shape as my hx35. Same goes for other h1 setups I've worked with, except the baby h1c
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
The wh1e and big h1c that are in my possesion both have the same total diameter and outlet shape as my hx35.
So assuming I was using a factory manifold, what is the consensus for a decent amount of downward spacing? I was looking at these adapters. Looks like they space it down 2.5". Hoping to keep the factory 16cm t3 housing and internal gate. (hx-40). There is also a 1/2" thick TD05 to T3 adapter.
Also anyone making any kind of bracing for these monsters?
You must be logged in to view this image or video.
Can anyone confirm the fitment with the treadstone cast manifold with an HX35
Not going to work. Turbine hits the block
Maybe I'm not finding them but it'd sure help to know where you guys are purchasing some of these manifolds. Some of the ones mentioned that I've tried looking up but can't find...
RedJack, ERL, Revhard.
Have thought about the Treadstone or maybe Megan Racing T3 manifold but not sure about clearance of the wastegate with the Treadstone (from MAP) and not sure about the quality of the Megan Racing manifold.
Managed to get a cheapie eBay manifold to work, this is just for the moment until I get my new setup up and running and can Tig my own.
Hx40 6-blade with BEP T3 .70
You must be logged in to view this image or video.
As you can see clearance is definitely an issue which is a problem bwhite had as well.
You must be logged in to view this image or video.
Almost had to get into the wastegate for it to clear but has just enough to clear the block and required no denting of the water pipe.