The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Kiggly Racing
Please Support Fuel Injector Clinic

420A Videos

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

<a href="http://video.cardomain.com/clip.aspx?key=050D3104160B5E6E"><img src="http://video.cardomain.com/ClipLinkThumb.aspx?id=050D3104160B5E6E" border="0"></a></a>

first time startin car with cams and big turbo
2.0 bottom end wiseco pistons egale rods
crower stage2 turbo cams ,springs and retainers
this was before tranny swap
 
well this is my 95 rs 420-a Nt eclipse be 4 and after i put on my headers exhaust intake coil pack 10 mm wires and v tip plugs

The be 4
it would not stay in place without wall be 4 mods
<font face="Verdana" size="1" color="#999999"><br/><a style="font: Verdana" href="http://vids.myspace.com/index.cfm?fuseaction=vids.individual&videoid=54827048">eclipse burnout</a><br/><object width="425px" height="360px" ><param name="allowFullScreen" value="true"/><param name="wmode" value="transparent"/><param name="movie" value="http://mediaservices.myspace.com/services/media/embed.aspx/m=54827048,t=1,mt=video"/><embed src="http://mediaservices.myspace.com/services/media/embed.aspx/m=54827048,t=1,mt=video" width="425" height="360" allowFullScreen="true" type="application/x-shockwave-flash" wmode="transparent"></embed></object><br/><a style="font: Verdana" href="http://www.myspace.com/thereawaker">JOHNNYY BOY DA PRINCE</a> | <a style="font: Verdana" href="http://vids.myspace.com">MySpace Video</a></font>
 
Last edited by a moderator:
<object width="640" height="385"><param name="movie" value="http://www.youtube.com/v/gBjERhLdUyE&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/gBjERhLdUyE&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="385"></embed></object>
 
damn rage you are super close to 10s, and i mean super super close, if you nail that launch better its basically yours. You said you spun your tires a lot, figured it was either that or you had a delayed reaction time, but either way good job!
 
Here's my fav's. last two videos are awesome. He rebuilt his 1995 Eclipse 420a twice and in 2010 he went big. :rocks:

YouTube - 420a turbo eclipse
YouTube - 420a eclipse turbo in tunnle part III
YouTube - SAFC II 1995 eclipse
YouTube - blown motor 420a eclipse
This one is what I was talking about the bearings and block differences. I believe in this 1st rebuild he used 97-99 420a bearings and notched his 95-96 block for them.
YouTube - turbo 420a build
Start up after rebuilt. It gets better keep watching.
YouTube - built 420a turbo
YouTube - 420a turbo drive bye
Same rebuilt him doing a 400ft speed trap?
YouTube - eclipse rs-t 400ft
Boom, 2nd rebuild
YouTube - 420a rebuild part II
YouTube - 420a turbo eclipse

Here's the two that are awesome, for this year 2010 3 months ago.
420a Top mount Holset 40 on a 420a :hellyeah:
YouTube - fully built turbo 420a top mount

Start up with the HX40 top mount. July 2010
YouTube - 420a top mount

Pretty cool, very motivating for any 420a owner. But bulletdsm is way better all motor :thumb:
 
Here's a few of my vids:


Checking the grip after installing coil-overs on the rear's
YouTube - Eclipse 420a-T tires screaming!

Nice fly-by after that....:hellyeah:
YouTube - Eclipse 420a Turbo GS fly by

I lil vid I made when I got my go-pro of my car and my friends cars...
I know it's in spanish but it's still nice... :p
YouTube - MACHICHES RACING & SPEEDCLUBPR.COM VIDEO

This was when I went to the dyno, it actually made 241hp and 258tq on the 3rd pass the first pass was the one in the vid.... I just did some tunning with the AFPR becuase that's all I had to tune with....
www.speedclubpr.com Dyno Contest Cyexmaster Eclips - Car Videos on StreetFire

*Notice the psi on the chart.... for some reason my MBC was having problems that day, but I normally had the car @ 12psi...:sneaky:
 
I'm actually contemplating making a video of me doing a couple pulls in the car.

Anyways, this isn't much but it's something. My buddies wired my horn up to my brakes all while I was installing the turbo kit. I was doing some test runs to make sure I was building boost and my vacuum lines were all hooked up correctly. Little did I know...

YouTube - &#x202a;Funniest Horn Prank: Tom&#39;s Turbo Eclipse&#x202c;&rlm;

Hey where did you get the triple gauge pod for you dash? If you still have it, can you take pictures of it and post them? Thanks:)
 
Hey where did you get the triple gauge pod for you dash? If you still have it, can you take pictures of it and post them? Thanks:)
That video was posted four years ago... I don't think he visits here much anymore.

Anyway, Autometer makes them, which you can buy from Summit Racing. MachV also sells them, and I'm sure you can find them on eBay as well.
 
VelocitàPaola;152639298 said:
That video was posted four years ago... I don't think he visits here much anymore.

Anyway, Autometer makes them, which you can buy from Summit Racing. MachV also sells them, and I'm sure you can find them on eBay as well.

Oh Boy! Thank you so much! I have been looking for an altenative to the A pillar setup for a while.:hellyeah:

OK I found this one but its not for an eclipse or talon. I couldn't find them at summit racing, or autometer.

OctaneMotorSports.com
 
Oh Boy! Thank you so much! I have been looking for an altenative to the A pillar setup for a while.:hellyeah:

OK I found this one but its not for an eclipse or talon. I couldn't find them at summit racing, or autometer.

OctaneMotorSports.com
Oh, I thought you were talking about the A-pillar gauge pod when you said "triple gauge pod." He made that from scratch out of fiberglass; so you're SOL there unless you want to do the same. There are companies that sell dual gauge pod bezels for around the stock cluster, as well as dual gauge pods that fit in place of the HVAC vents, though.
 
VelocitàPaola;152640023 said:
Oh, I thought you were talking about the A-pillar gauge pod when you said "triple gauge pod." He made that from scratch out of fiberglass; so you're SOL there unless you want to do the same. There are companies that sell dual gauge pod bezels for around the stock cluster, as well as dual gauge pods that fit in place of the HVAC vents, though.

Well I thought to give it a try. I went on to YouTube yesterday and found out the 95 Eclipse in The Fast and The Furious that Paul Walker drove had a modified passenger side airbag to include three gauges. The only problem is that the gauges were not angled so that he could see them while driving. I think I could get around that issue fairly easily. What I might do is call up a salvage yard and get an additional airbag station for my ESi and use it towards fiberglass molding purposes.

YouTube - &#x202a;REAL Eclipse from The Fast and The Furious! Walkaround + Interior!!&#x202c;&rlm;
 
<iframe width="420" height="315" src="http://www.youtube.com/embed/aZ9-izQuF74" frameborder="0" allowfullscreen></iframe>
415/365
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top