The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support Rix Racing

Alky Setup Thread and PSI Improvement

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Car Cannibal

20+ Year Contributor
532
58
Jun 7, 2003
Chicago, Illinois
I figured this might help others get an idea of what an alky kit will do on their DSM if we have a thread with setups in it.

Kit = Devils Own DVC-30
Nozzles = 3GPH Pre & 12GPH Post
Alky = 100% Meth
Turn On = 10psi
Max = 19psi
Pump Gas Psi = 19
Alky Psi = 27
AFR in 3rd = 11.2
Turbo = PTE 61/52S in T4 .68
Intercooler = FMIC
 
Dam that is some pretty good improvements anyone else see similar?
 
BTW, that's with 24 degrees of timing at WOT from about 4k on. I've hit 28psi on cold nights in 3rd without any knock, damn this stuff is great. :hellyeah:
 
Glade you are happy with it. Its a great mod and thats why so many e85 have been switching over to it.
 
Kit = Snow Performance Stage 2
Nozzles = 625 + 375 ml/min dual nozzles
Alky = 75/25 meth/water
Turn On = 12psi
Max = 20psi
Pump Gas Psi = 28
Pump Gas Timing = 15*
Alky Psi = 38
Alky Timing = 18*
AFR in 3rd = 11.7
Turbo = Holset HX-40 (56mm)
Intercooler = FMIC

At 38psi and 18* timing I see zero knock. Im scared to push coolant and/or blow the HG so I leave it there. Serves me well though, 565 awhp and 524 lb/ft of torque.
 
Kit = Snow Performance Stage 2
Nozzles = 625 + 375 ml/min dual nozzles
Alky = 75/25 meth/water
Turn On = 12psi
Max = 20psi
Pump Gas Psi = 28
Pump Gas Timing = 15*
Alky Psi = 38
Alky Timing = 18*
AFR in 3rd = 11.7
Turbo = Holset HX-40 (56mm)
Intercooler = FMIC

At 38psi and 18* timing I see zero knock. Im scared to push coolant and/or blow the HG so I leave it there. Serves me well though, 565 awhp and 524 lb/ft of torque.

This is exactly what i wanted to see. I was trying to figure out if alky/meth would be enough to get my HX35 to run close to 35-40 psi with meth and pump.
 
Kit = BECOOL Stage 1
Nozzles = 7 GPH/M7 (441ml/min) & 1GPH/M1 (63ml/min) Pre Turbo nozzle
Alky = 35/65 meth/water Washer fluid (Blue Juice)
Turn On = 7psi
Max = 17-18psi
Pump Gas Psi = 17-18
Pump Gas Timing = 18*
Alky Psi = 27-28 with some blips of knock that could be false knock.
Alky Timing = 16*
AFR in 3rd = 11.5
Turbo = MHI E316G
Intercooler = Supra Side Mount


Not been tuning it long. Hoping to max out the turbo when done.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top