The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support STM Tuned

2G motor mount bolts

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

diablo03

10+ Year Contributor
37
0
Jun 1, 2010
St Louis, Missouri
I recently got a 2G timing belt side mount that didn't have the two nuts to hold the block side and the chassis side together.

Does anyone know where to get replacement ones from?

It's the nuts that go on the two vertical bolts in the pic.

You must be logged in to view this image or video.


Thanks in advance
 
you can always try jnztuning, thats where i got all my oem stuff for my build,
and i remember getting this same bolts new,
You must be logged in to view this image or video.
 
Last edited by a moderator:
The two nuts are: MB911282

And that middle bolt is: MB309043

I recommend JNZ but I think it may be easier and faster and cheaper to pull off the stud and take it to the Hardware store.

Good Luck
 
you can always try jnztuning, thats where i got all my oem stuff for my build,
and i remember getting this same bolts new,
You must be logged in to view this image or video.

what part is that:confused:
 
Last edited by a moderator:
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top