The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support STM Tuned

using an awd trans for fwd question

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

jturbo06

Probationary Member
8
0
Jul 31, 2009
shawnee, Oklahoma
does anyone have any pics of the viscous clutch and what has to be welded to make the trans fwd? thanks
 
its a 1g trans but its going in a fiero so i need it fwd only i havent been anble to find a vce anywhere and was just hoping someone had some pics of it modifyed already
 
Here's a pic of what a normal, unmodified VC looks like:

You must be logged in to view this image or video.


Jon @ TRE showed me how to machine them and where to weld, but it's a tough thing to describe with only words. It's much easier to show someone than it is to tell someone. I've got a box of VC's laying around here. If I can find them and locate a lathe to borrow, I'll do a write up on it. the only tool required is a lathe and a welder - I can tell you that much.
 
now that one sais that its mainly intended for dyno use, are there going to be problems or anything down the road if i use those in a dd?
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top