tsi1991awd
10+ Year Contributor
- 1,366
- 6
- Sep 28, 2008
-
Puyallup,
Washington
Is there a pedal adjustment that can be made aside from the master cylinder rod? I adjusted the rod a month ago and noticed tonight that it engages almost immediately after I let off the floor.
I did what was said according to the video...where you turn the rod, check to see if the slave pushes in and if it does you turn the rod more. Then when the slave can't be pushed freely, you back it out just until the slave can be pushed in freely then tighten the nut. I'll try and check adjustment again, but I don't know....maybe my clutch is shot
I did what was said according to the video...where you turn the rod, check to see if the slave pushes in and if it does you turn the rod more. Then when the slave can't be pushed freely, you back it out just until the slave can be pushed in freely then tighten the nut. I'll try and check adjustment again, but I don't know....maybe my clutch is shot