kawboy
15+ Year Contributor
- 724
- 5
- Jan 20, 2006
-
Toms River,
New_Jersey
Locate a normal HX40 compressor housing
That thing is stupid huge for some reason
That thing is stupid huge for some reason
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
How do you plan to route your water pump inlet? That thing looks like it is sitting way back on the block.
An easy thing to do to get it further out would be to mill the head side of the exhaust manifold with like a 5* more upward angle. That would put it out plenty far enough to probably run the stock water pipe if you wanted to.
Ezz-e, we talked on the link forums in your thread. This is the wh1c correct? They come stock with a 12cm^2 turbine housing and the same comrpessor as the 8blade hx35 with the same turbine wheel, of course.
Its been awile but i got my whole turbo setup going. Here are some pics!
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
Its been awile but i got my whole turbo setup going. Here are some pics!
Its been awile but i got my whole turbo setup going. Here are some pics!
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
This is why I remember youThis setup is on a awd 4g63 95 civic, it has stock 6 bolt motor.
Also the flapper seems to open up more when the arm is against the housing and not away from it with the little amount of play it has, might have to washer it againt the housing so it opens up the maximum amount.
Very similar setup me and you have. Looks like a 2.0 or 2.3 block, with a ERL manifold and hx40 turbo?
James
Setup's looking good Jay
Thanks man, how your car comming? Come buy my fuel cell already! So i can buy a smaller one.
You must be logged in to view this image or video.
with the spacer do im just guessing but you have to run two gaskets?