The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support Fuel Injector Clinic

Would this valve spring compressor work?

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

This is the one that I use. It works great and is from the company that makes the dealer/OE tools that Mitsu specs.
 
This is the one that I use. It works great and is from the company that makes the dealer/OE tools that Mitsu specs.

Sweet. I bought it. Hopefully it holds up.
 
Good luck with it. It looks like the ones you can use to change springs without pulling the head. Just make sure your cams are turned to the point where all the valves on the cylinder you are working on are closed and make sure to block your wheels so you dont run the risk of the motor turning over. I have used something similar and it worked great. Good luck.
 
Good luck with it. It looks like the ones you can use to change springs without pulling the head. Just make sure your cams are turned to the point where all the valves on the cylinder you are working on are closed and make sure to block your wheels so you dont run the risk of the motor turning over. I have used something similar and it worked great. Good luck.

What??

The cams will be out regardless and every valve will be close from the spring still being on there. And Im pretty sure you couldn't turn the motor over with the cams out while removing the springs.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top