*New Release* AF 2g Topmount T3/T4/Vband Turbo Manifolds

Posted by Archer Fabrications, Apr 28, 2017

Please Support Feal Suspension
  1. Archer Fabrications

    Archer Fabrications Supporting Vendor

    5,930
    631
    Joined May 9, 2011
    Scottsdale, Arizona
    Hey Tuners! We have been working hard to create new products for the community, one of which we are proud to announce is our new Top mount T3/T4/Vband manifolds.

    For full product line and purchasing please visit our brand new webstore, located at www.archerfabrications.com


    AF 2g Topmount T3/T4/Vband Turbo Manifold $950.00 + Shipping

    For the street car enthusiast we have developed a Top mount to keep most of Your stock amenities, this top mount faces the compressor housing to the passenger side like stock, Allowing you to keep your stock style charge and exhaust pipe routing.

    can keep stock 1g radiator and will need to use pusher fans, but it is a very tight fit and a sirrico style radiator is recommend for easier installation and a little extra clearance room.

    7bolt blocks may need to have a small unnecessary portion of the block casting filed down where one of the front transmission bolts would have gone. Manifold is designed around a 6bolt block in a 2g

    can keep your alternator location stock as well. This manifold has been verified to fit T3 turbos as large as forced performance's "super94/super99" and Precision Turbo's H cover, "6870" size turbos.

    All Archer Fabrications, LLC. Turbo manifolds are one of a kind hand crafted pieces. Runner design may vary slightly from the displayed picture.

    Made in the USA and intended for "off road use."

    -Precision Tig welded

    -Fully back purged using the purest liquid argon (99.98%) and state of the art purging tools

    -304L schedule 40 stainless runners

    -1/2" 1018 steel CNC Machined Head Flange and Turbo Flange

    -TIAL 44mm MVR stainless waste gate inlet flange by default

    -Runner entries and collector are welded inside and out for utmost strength

    -All flanges welded using thick aluminum heat sinks to prevent warpage during welding

    -Flanges decked flat to ensure perfect seal

    -compatible with stock 1g radiator with Pusher fans (however, tucked sirrico style radiator is still recommended for the extra space)

    -3 year warranty against weld defects to the original purchaser from the date shipped



    NOTE:



    -please allow up to 3-5 weeks of build time for your manifold depending on backlog.

    -Additional options could add additional wait time by a couple of days

    -All Archer Fabrications products are hand made to order and one of a kind, each manifold may have slight runner variations that differ from the picture.

    We are also going to be offering a titanium turbo flange stud and nut kit as an upgrade very soon, keep an eye out for new products and visit our webstore for the most up to date information.

    IMG_5495.JPG IMG_5498.JPG IMG_5521.JPG IMG_5507.JPG IMG_5470.JPG IMG_5467.JPG IMG_5471.JPG IMG_5537.JPG
     

    Log in/Register to remove ads
    My DSM:
    1999 Mitsubishi Eclipse GSX

    Drag Race Build

    11.128 @ 132.5 MPH
    Loading...
    Kapok6, ceedawg and b00st3d like this.
  2. b00st3d

    b00st3d Supporting Member

    53
    67
    Joined Jan 13, 2005
    Yukon, Oklahoma
    You'll see THIS manifold on my car next week!
     
    Last edited: Apr 28, 2017
    My DSM:
    1998 Mitsubishi Eclipse GSX

    Drag Race Build

    GT40   manual
    b00st3d 1990 Eagle Talon TSi AWD (sold)

    16g   manual
    1997 Mitsubishi Eclipse GSX

    Street Build

    50trim   automatic
    1998 Eagle Talon TSi AWD

    Street Build

    11.28 @ 126.86 MPH
    Loading...
  3. Archer Fabrications

    Archer Fabrications Supporting Vendor

    5,930
    631
    Joined May 9, 2011
    Scottsdale, Arizona
    Bump! Who needs a top mount for an open scroll turbo?
     
    My DSM:
    1999 Mitsubishi Eclipse GSX

    Drag Race Build

    11.128 @ 132.5 MPH
    Loading...
  4. DetroitStroker

    DetroitStroker Proven Member

    142
    30
    Joined Dec 22, 2012
    Detroit, Michigan
    How much for a divided t4 collector without wastegate provisions?

    I know it's nothing you posted - but love the work!
     
    Archer Fabrications likes this.
  5. Archer Fabrications

    Archer Fabrications Supporting Vendor

    5,930
    631
    Joined May 9, 2011
    Scottsdale, Arizona
    Collectors are on our website with a variety of options, www.archerfabrications.com
     
    Last edited: May 8, 2017
    My DSM:
    1999 Mitsubishi Eclipse GSX

    Drag Race Build

    11.128 @ 132.5 MPH
    Loading...
  6. Dave2g

    Dave2g Probationary Member

    24
    17
    Joined Mar 14, 2017
    Poughkeepsie, New York
    When I start my build this summer I will be going to YOU guys for a manifold. Welds look fantastic, thanks for supporting the community with the wonderful work.
     
    My DSM:
    1995 Eagle Talon TSi AWD

    Street Build

    GT35   manual
    Loading...
    Archer Fabrications likes this.
  7. Archer Fabrications

    Archer Fabrications Supporting Vendor

    5,930
    631
    Joined May 9, 2011
    Scottsdale, Arizona
    thanks for the kind words! We are trying to change the DSM communitie's expectation of QUALITY exhaust components, one manifold at a time ;)
     
    My DSM:
    1999 Mitsubishi Eclipse GSX

    Drag Race Build

    11.128 @ 132.5 MPH
    Loading...
    DSMrightontime and chinola69 like this.
  8. 95eclipser

    95eclipser Proven Member

    647
    190
    Joined Feb 3, 2006
    Manassas, Virginia
    Dang! Just reviewed both of your new topmounts and i'm torn between the two for accessory reasons. Any chance you will be coming out with a forward facing manifold before I make my decision?
     
    My DSM:
    1999 Mitsubishi Eclipse GSX

    Street Build

    464 whp   379 lb/ft
    1997 Mitsubishi Eclipse GSX

    10.920 @ 133.900 MPH
    Loading...
    Archer Fabrications likes this.
  9. ceedawg

    ceedawg Supporting Member

    1,289
    200
    Joined Jun 2, 2004
    laurelton, New York
    Have you decided on making Topmount T4TS Mani's with 1.5 inch runners I will perhaps be interested. This bottom mounts a pain in the are. LMK. I maybe working on taking the ETS TS T4 one I have and selling it. Beautiful work you do. Keltalon swears by it and I see why!
     
    My DSM:
    Loading...
    Archer Fabrications likes this.
  10. Archer Fabrications

    Archer Fabrications Supporting Vendor

    5,930
    631
    Joined May 9, 2011
    Scottsdale, Arizona
    If i can get a hold of an existing forward facing for dsm to make a fixture from yes i could. The reason i havnt yet is cause my motor is out of the car.
     
    My DSM:
    1999 Mitsubishi Eclipse GSX

    Drag Race Build

    11.128 @ 132.5 MPH
    Loading...
  11. Archer Fabrications

    Archer Fabrications Supporting Vendor

    5,930
    631
    Joined May 9, 2011
    Scottsdale, Arizona
    All my manifolds are 1.5" runners with the exception of the up comming dsm factory replacement manifold which will be 1.25". T4 ts topmount will be in the works in the near future ive been super busy and it's kept me from r&d

    Thanks for the kind words!
     
    My DSM:
    1999 Mitsubishi Eclipse GSX

    Drag Race Build

    11.128 @ 132.5 MPH
    Loading...
    ceedawg likes this.
  12. guseclipse

    guseclipse Proven Member

    172
    11
    Joined Sep 10, 2010
    Paso Robles, California
    Would you be able to make a 02 housing like this one?
     

    Attached Files:

    My DSM:
    1998 Mitsubishi Eclipse GSX

    Street Build

    13.00 @ 100.000 MPH
    Loading...
  13. Archer Fabrications

    Archer Fabrications Supporting Vendor

    5,930
    631
    Joined May 9, 2011
    Scottsdale, Arizona
    If you send it to me, yes but this thread isnt about 02 housings
     
    My DSM:
    1999 Mitsubishi Eclipse GSX

    Drag Race Build

    11.128 @ 132.5 MPH
    Loading...
  14. guseclipse

    guseclipse Proven Member

    172
    11
    Joined Sep 10, 2010
    Paso Robles, California
    Yes but it would be nice to go with the manifold you sell.
     
    My DSM:
    1998 Mitsubishi Eclipse GSX

    Street Build

    13.00 @ 100.000 MPH
    Loading...
  15. Archer Fabrications

    Archer Fabrications Supporting Vendor

    5,930
    631
    Joined May 9, 2011
    Scottsdale, Arizona
    I plan to make complete hot parts kits in the near future :)
     
    My DSM:
    1999 Mitsubishi Eclipse GSX

    Drag Race Build

    11.128 @ 132.5 MPH
    Loading...
    DJRace and guseclipse like this.
  16. Archer Fabrications

    Archer Fabrications Supporting Vendor

    5,930
    631
    Joined May 9, 2011
    Scottsdale, Arizona
    Hey everyone! We made another 2g dsm top mount, but this time with a hood exit dump tube and a 3" side exit exhaust. Complete hot parts kit for this manifold will be available in the near future.

    Able to keep power steering, stock alternator location, and a 1g full sized radiator with pusher fans. But an mk3 golf tucked rad is recommended.

    Normally the exhaust would be polished but this one is getting a titanium cerakote!

    Please visit our website to see our full product line.

    Www.archerfabrications.com
    IMG_6530.JPG IMG_6531.JPG IMG_6543.JPG
    IMG_6538.JPG
     
    My DSM:
    1999 Mitsubishi Eclipse GSX

    Drag Race Build

    11.128 @ 132.5 MPH
    Loading...
  17. 7o2mikey

    7o2mikey Probationary Member

    17
    8
    Joined Feb 26, 2017
    Cleveland, Ohio
    This may be a dumb question, but does it make a HP difference between to or bottom mount?
     
  18. Archer Fabrications

    Archer Fabrications Supporting Vendor

    5,930
    631
    Joined May 9, 2011
    Scottsdale, Arizona
    In theory yes, a top mount has less curves and more volume in runner length then the typical bottom mount. I dont have any dyno results Or cad testing to back that up though. Normally a top mount is a convienience of installation thing for larger turbos. Plus they look bad ass. But yes a top mount *should* make more hp then a bottom mount. Also, our drag top mount which faces the turbo in a reverse orentation should make even more power then this one, based on the runner length and even less bends then the manifold shown here. The drag manifold requires a lot to be deleted to sacrifice for that extra flow gains but does allow the fitment of a 42R and possibly a 45R size turbo with hood modifications. While the 2g "street" one will fit up to an FP super99 or precision 6870 size maximum. This manifold is marketed toward the 2g street enthusiast and allows you to keep most of your stock placement accessories.
     
    Last edited: Jun 18, 2017
    My DSM:
    1999 Mitsubishi Eclipse GSX

    Drag Race Build

    11.128 @ 132.5 MPH
    Loading...
  19. 7o2mikey

    7o2mikey Probationary Member

    17
    8
    Joined Feb 26, 2017
    Cleveland, Ohio
    Okay thank you! I'll be running a Borg Warner S256 and I'll need a manifold soon I'll keep you all in mind ! I'll need more info soon as well!!
     
    Archer Fabrications likes this.
  20. Archer Fabrications

    Archer Fabrications Supporting Vendor

    5,930
    631
    Joined May 9, 2011
    Scottsdale, Arizona
    Bump for top mounts! These are getting very popular!! Thank you everyone for your support!

    Turbo pictured is an FP super99 72mm T3

    WWW.ARCHERFABRICATIONS.COM IMG_7149.JPG IMG_7145.JPG IMG_7144.JPG IMG_7135.JPG

    If anyone was at MOD2017 In cypress CA and saw this car, he was featuring our top mount.
    IMG_7070.JPG
     
    My DSM:
    1999 Mitsubishi Eclipse GSX

    Drag Race Build

    11.128 @ 132.5 MPH
    Loading...
    99gst_racer and EJ'sEclipse like this.
  21. Strm Trpr

    Strm Trpr Proven Member

    1,502
    42
    Joined Jan 20, 2004
    Lodi, California
    I can not wait for the T4 TS Top Mount!!
     
    My DSM:
    Loading...
    Archer Fabrications likes this.
  22. EJ'sEclipse

    EJ'sEclipse Probationary Member

    2
    1
    Joined Feb 4, 2014
    Visalia, California
    I did see this car! I was parked right next to him! ROFL Very impressive work!
    I will surely go to you once I have a turbo worth displaying LOL
     
    My DSM:
    1997 Mitsubishi Eclipse GST

    Street Build

    14b   manual
    Loading...
    Archer Fabrications likes this.
  23. Archer Fabrications

    Archer Fabrications Supporting Vendor

    5,930
    631
    Joined May 9, 2011
    Scottsdale, Arizona
    Glad you liked it! And I'll be here when you are ready, i can get you a turbo as well FP or PTE
     
    My DSM:
    1999 Mitsubishi Eclipse GSX

    Drag Race Build

    11.128 @ 132.5 MPH
    Loading...
  24. Archer Fabrications

    Archer Fabrications Supporting Vendor

    5,930
    631
    Joined May 9, 2011
    Scottsdale, Arizona
    Bump for top mounts!
     
    My DSM:
    1999 Mitsubishi Eclipse GSX

    Drag Race Build

    11.128 @ 132.5 MPH
    Loading...
  25. Archer Fabrications

    Archer Fabrications Supporting Vendor

    5,930
    631
    Joined May 9, 2011
    Scottsdale, Arizona
    Last edited: Sep 25, 2017
    My DSM:
    1999 Mitsubishi Eclipse GSX

    Drag Race Build

    11.128 @ 132.5 MPH
    Loading...

Share This Page

Loading...


Log in/Register to remove ads

Support Vendors who Support the DSM Community
Ace Race Parts Advanced Fuel Injection Archer Fabrication Boostin Performance ECM Tuning Extreme Turbo Systems ExtremePSI Feal Suspension Fuel Injector Clinic Jacks Transmissions Jackson Auto Machine JNZ Tuning Magnus Motorsports Miller Import Parts Morrison Fabrication & Design OHM Racing Race Components Inc RockAuto RoadSurge Spultronix Performance STM Tuned Strictly Import Motorsports VR Speed Factory