The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support JNZ Tuning
Please Support Fuel Injector Clinic

Lifters still ticking?

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

BoosterJ

Proven Member
61
1
Feb 27, 2013
Racine, Wisconsin
I'm hearing a ticking noise around the head and I've changed lifters, and installed the kiggly racing Hla regulator, and it's still ticking. Cold start oil pressure is around 80 and once warmed up its around 20-30 , deleted the balance shafts too
 
Just because you changed em doesnt mean they still won't tick on a cold start up. How long till it goes away?
Its pretty much always ticking and sometimes fades out but then returns even when warmed up
 
Good pressure, but wonder if there's something with the rocker rail where oil pressure isn't feeding the rockers too well to prevent the ticking... Unless he put in 3G lifters were the ports are too big to hold that 20-30 lbs of pressure.
 
they're
Good pressure, but wonder if there's something with the rocker rail where oil pressure isn't feeding the rockers too well to prevent the ticking... Unless he put in 3G lifters were the ports are too big to hold that 20-30 lbs of pressure.
they're Top line revised lifters
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top