The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support STM Tuned

FRH Intake Manifold

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

jettster91

10+ Year Contributor
54
0
Feb 4, 2011
caledonia, Illinois
I just picked up a FRH intake manifold and it came with the spacer from the head to intake. But there isnt a gasket from the plenum to intake runners.. i have no idea what i should do about this. Is there anything you guys suggest for that gasket?
 
I would go to Napa and get the dark gray gasket material and use the spacer as a outline to make the gasket. I also would make two gaskets for each side of the spacer just to be safe. I would use a bead of the grey rtv for the plenum to intake runner part
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top