boost controller install.

Posted by Grescht, Jun 3, 2008
Newbie Thread Graveyard - Repetitive questions already answered in the FAQ Forum, Tech Articles, other New Member required reading, VFAQ.com, etc. This is a read-only forum. If your thread ends up here, you didn't do the required reading.

  1. Grescht

    Grescht Proven Member

    DSM Profiles:
    1
    Joined:
    Apr 1, 2008
    Posts:
    154
    Likes Received:
    0
    New Kent, Virginia
    Sorry if this has been asked over and over and over again. Ive searched some but i'm kinda pressed for time and i need to drive the car. I've got a pic. just please tell me what number hooks to whichever number. or if i even need 3,4 and 5

    Attached Files:

    #1
  2. Grescht

    Grescht Proven Member

    DSM Profiles:
    1
    Joined:
    Apr 1, 2008
    Posts:
    154
    Likes Received:
    0
    New Kent, Virginia
    1= top port on controller
    2= Bottom port on controller
    3=left side of other peice
    4= Top side of other peice
    5= Right side of Other peice
    6= actuator
    7= boost source
    #2
  3. DSMunknown

    DSMunknown Proven Member

    Joined:
    Sep 16, 2004
    Posts:
    2,950
    Likes Received:
    24
    Worcester, Massachusetts
    #3
  4. Grescht

    Grescht Proven Member

    DSM Profiles:
    1
    Joined:
    Apr 1, 2008
    Posts:
    154
    Likes Received:
    0
    New Kent, Virginia
    i'm not that much of an idiot. I did read that post. I didn't see where it said anything about me needing that other peice that i put in my picture. Is that for the BCS? thats the only thing i can think of it going to.
    #4
  5. MrBoxx

    MrBoxx Moderator

    Joined:
    Aug 19, 2005
    Posts:
    2,841
    Likes Received:
    84
    Midland, Michigan
    You'll be needing this write-up, as you have the old-skool Turbosmart-style boost controller with the gated tee-fitting.

    Do NOT tap the BOV line with that Tee fitting or the Boost Controller.
    #5
  6. Grescht

    Grescht Proven Member

    DSM Profiles:
    1
    Joined:
    Apr 1, 2008
    Posts:
    154
    Likes Received:
    0
    New Kent, Virginia
    c'mon guys. My setup doesn't look like that. The arrow points to the other direction. look at my picture. i'll try running it without the t- fitting.
    #6
  7. DSMunknown

    DSMunknown Proven Member

    Joined:
    Sep 16, 2004
    Posts:
    2,950
    Likes Received:
    24
    Worcester, Massachusetts
    Post up a real photo.
    #7

Share This Page